Viewing all customer Discussions for:

15-255 3/4" Coil Single Support

I am trying to get a coil balance to go onto the coil support. I purchased 4 of each and had no problems with 3. Could either the coil balance or the coil support be the wrong size.

I ordered the 15-259 coil balance pivot shoe, but the coil I have uses screws to attach to the shoe. I am assuming the 15-259 is not correct but I need a different coil/shoe part?

Single coil window balance (I think that is the correct term for the part(s)) for tilt out vinyl windows. Within the case with the philips screw is wide coil that allows the lower part of the window to open and close smoothly.

That's for a Simonton window.

Hello. The piece is 1 1/4" wide, 3/4" deep and 2 3/4" long. What can I replace with this? I saw there is a coil weight, which one should I buy? Each window is weighing about 12.5 lbs. Thanks

We need to replace balances on Simonton 5500 series vinyl replacement windows. We would like to do 1 window first. The coils have no stamp on them. The bottom sash weighs 18.6 #'s.The top sash weighs 17#'s. We have included pictures. Please make a list of the parts needed and we will place the ... (cont.)

Hello, My double-hung window bottom sash drops down and does not stay up. The balance assembly are broken. The parts needed look similar to this post: https://www.swisco.com/discussions/New-window-coil-balances-for-Certainteed-window-77-257431 The plastic cover says: Certain Teed. The two coils s ... (cont.)

Please a having broken on one side window

I have recently purchased a house with a number of these windows which have the same problem. The pivot lock shoe on one side has gotten stuck at the bottom and, I assume, as a result of forcefully attempting to close the window fully, has bent the pivot pin and broken the tilt lock. I don't know th ... (cont.)

I need to replace the coil balances and shoes on some Simonton double hung windows. Can you identify what I'll need from these pictures or will you need some more info?

Good morning, could you please inform me of the replacement parts for these items...Thank you

I have some broken pivot shoes and the metal parts that fit into them. I expect the windows are about 20 years old?? Simonton is on the lock lever

I have two Simonton windows that need new coil balance assemblies. One is 30x52in and the other is 27x50in. I've identified that I need: -4 https://www.swisco.com/Pivot-Bar-2-1_2-inch/pd/Tilt-Window-Replacement-Sash-Pivot-Bars/26-083 -4 https://www.swisco.com/coil-single/pd/Sash-Support-Coil-Balance ... (cont.)

Please advise if these are the parts I need to replace the above pictured ones: 15-159 pivot shoe 15-259 coil balance pivot shoe 15-255 3/4" coil support 26083 2-1/2" pivot bar ???? S-159-S in appropriate weight

Hi there, do you possibly sell these parts for a window? The photos are bad, sorry but Im hoping you might recognize them. One photo has the window brand if that helps. Thanks in advance. Karin

I've gotten myself confused on the exact parts that I will need to replace these coils that I removed from my Simonton double hung windows.

Looking to replace 2 balance bars and 2 spring coil on each side as I was told. Windows we're not staying up

Hello! I'm reaching out in hopes of determining the correct spring weight for a balance replacement. I'm working on a 28"x 44" Simonton window installed in 2011. I removed the spring and found no information regarding the weight or length - please see attached photos. Any information you could ... (cont.)

Looking for replacement window stays or balances for my simonton windows. Looks similar to some you have listed on your site but I wanted to try this for more assurance

Attached picture shows the front and back of our old pivot shoe that is 3/4" deep x 1-1/4" wide x 2-1/4 high. It is an obsolete Unique Balance part number: Shoe 720D, Cam 165 x 390. The picture also shows our coil spring balance. When I called, it was suggested that I send this photo for evaluation ... (cont.)