Viewing all customer Discussions for:

15-255 3/4" Coil Single Support

What part # would these be? 1st 3 pics are of the balance needed and the other is a cam lock. Distance between cam lock screw holes measure 2 1/16". Came off a doublehung Simonton window purchased in 2011.

I am ordering a coil balance pivot shoe and need the coil that goes with it. It says it should go with series 156 but can’t figure out what weight it is.

I have 2 broken Coil Balance Shoes. I am looking for all replacement parts needed to replace all internal hardware on both sides of the small bathroom window. I understand these parts are no longer available but there are replacement parts. Please advise on what specifically I should order. See att ... (cont.)

Hello, I'm looking to find the correct coil balance for my window. I've attached a picture of the coil, which shows the number 4085 on it. Could you please help me identify and provide the right replacement parts? Thank you for your assistance, and I look forward to hearing from you! ... (cont.)

Prism windows 801 series double hung windows

Hello. I need to replace both the right and left side assemblies of my Simonton Prism window. Do you have parts available for purchase? Thanks. Nick

Any help identifying this make/model and or replacement parts would be appreciated. I'll be needing some other minor parts as well

Latch is stamped PRISM, Unable to match up the broken part.

window parts were in piceces in window. I am trying to find out which parts I need to order. The rest of the windows all have double coils in them.I 'm not sure if somebody tred to fix this half -way. Would sure like to know part #'s and how many to get for this window.I sure will get some spares,a ... (cont.)

My techs' comment's: Can't test out the balancers because the pin is broken also, they're not a standard balancer. Looks like it's a coil with a pulley built into it. Pin that slides into the bottom of the window is approximately 2 3/4 long 5/16 wide and approximate a quarter inch high ... (cont.)

From my last email, I need to order the coil balance pivot shoe # 15-259 to fit with my old Simmonton model windows. I would like to know which coiled balance spring I need to buy, knowing that my original ones have the # 405 on them.And do I need new certain teed lance spring cover on them?Is it ok ... (cont.)

I have a Sininton Window and am hopimg y'all can assist me above fotos show thw pieces i need to replace ....on both sides please let me know so i can get to it

Hello can you tell me what parts I need?

Hi,We have Simonton replacement windows in our home that were put in by the last owner. The coil balances are breaking and we need to replace. Not sure what parts are needed. We took the coil balance out of the window for you to review. Your help would be appreciated.Thank you,Liz and Rich ... (cont.)

I need a balancer assembly and a pivot bar for a Simonton double-hung sash. The balancer goes on the right side of the window facing it from inside the house, and the pivot bar goes on the left. the photos of the installed balancer are of the left one, as I had already removed the broken right side ... (cont.)

Need to purchase 8 balance assemblies for: Simonton Double Hung Windows 8088643/09 30.2500 58.2500 65DHWI 50073LEAR 6/25/04 B23WH The window weight is 18 lbs. Per your documentation, this would suggest I need (4) 4.5 lb springs in the new assembly. Would this work with one 9 lb spring? ... (cont.)

The plastic that holds the balance shoe has broken on both sides of the sash. I've sent pics of the info attached to the window. Do you have replacement parts?

Need 2 each of balance blocks, coil spring, cover, and sash pins shaft.channel is 1.25 wide and 13/16" deep

I need 8 of these but not sure where to start

I recently ordered what I thought was the correct replacement pivot shoe for my tilt in Simonton window. I was way off. I've mailed my return and would like to place an order if you can identify the part from the pictures I sent you. Thank you!