Viewing all customer Discussions for:

38-005 Truth Hardware Locking Handle, 2-3/8"

Hello,I am trying to find replacement window operators for my refurbished steel windows. I have the part still attached to the window before we refurbished it and stand alone. I would prefer if you had this part in black since we painted the windows black. Please advise if you carry this part. Al ... (cont.)

Hi. Our home was built in 1948. Several of the locking handles are broken where it engages into the window frame as described in first photo. I have both left and right handles as well as single handles. Are these available?

Good Afternoon, Attached are pictures of some old steel windows in the Cottage building at the River Hills project. Do you know what window openers, locks, etc might work for these windows? Please let me know. Thanks!

Please help me identify the replacement locks I need to get. The kind I found in local hardware stores have too short of an arm that swings out and doesn't catch the part on the window. The 1st pic I loaded shows the too short one.

Do you think your Truth Part No.38-005 will replace the hardware in the photo furnished herewith?

This latch is from a window manufactured in the 1980's. The Truth US Pat. # is 5103533

I am helping do some repairs at a non profit transitional living facility for homeless families. This facility used to be an old hotel. There are several window operators and latches that do not work. Attached are pictures of the a right side operator and a right side latch (both side latches may be ... (cont.)

This is the latch handle from an aluminum window, one for the left window pane and one for the right window pane. These may date from around the latye 1950's. this is 7/16" wide, 2 5/16" center to center for the mounting holes no markings are present on the latch, window frame or window c ... (cont.)

I haven't seen a casement lock yet here with these dimension. Mounting screws 2 5/8" Gap between mount and lock point is 1/2" to 5/8" depending on where you measure it on the taper. Cranks 39-002 and 39-001 fit these windows perfectly, but I suspect that's rather standard?

Hi this is Sue from Aspen Building Products and I was wondering if you could help me. thanks sue

Hello, I have identified part #38-005 which is the locking handle that I need for the windows that I have. I also need to identify the mating keeper for this handle. In other words,the part the handle hooks onto to keep the window closed. Thank you, Bill

May I please get help in ordering a replacement set of three pieces; two inward facing handles and a connecting rod that was on the opposite side of the wondow of the inward facing handles (the rod was outside). I lost the rod but it is 27" from the top hole where the top handle mounted to the botto ... (cont.)

Recently my parent's house was burglarized. They gained entry through a casement window that was mounted fairly low to the ground. It appears the window pane that normally opens was pried away from the frame enough to then pull it away resulting in the gears inside the crank breaking. I've lo ... (cont.)

Hi. What type of locking handle should be used for a glass casement window, which, I believe, uses a #39-001 9-inch window crank operator, which I want to buy from your company? What's the difference between handle 38-005 & 38-001? Do you ship to NY &/or PRico? Thanks

I have tried your 38001 and 38005, neither of which fit the keepers. I need several of these items, with left- and right-curved handles, so non-curved handles would be better. Thanks for your help and guidance, Brian

I am looking for a replacement to a window handle. It is a Truth Hardware Locking Handle,window,lower. It has this part number: 24.13.19.19. I'm thinking that the part number may be obsolete, I'm not sure. I am enclosing a picture of it. Any assistance you can give will be appreciated. ... (cont.)

I'm including 2 pictures of the window latch, notice one handle is broken, please let me know if have this available and price. Thank You