Viewing all customer Discussions for:

39-014 Casement Window Operator, 13-1/2" Arm

I am looking for ply gem window casement crank operator as shown on attached photo. thanks

I'm looking for two right side cranks

Window does not crank open or closed and window holder on bottom of window is off so window just pushed out at bottom . Also inside crank cover inside is 4 inches

The year window was installed in the kitchen in about 1980. The size of the window is 38" by 26". Crank is broken

I have two of these that will open the window but won't close. Assuming I need to replaced the operator.

Good day.Do you sell the replacement crank and latch for my window as seen in these pictures? If not, can you please point me in the right direction? Many thanks.Best,Brian

Hi. I am looking for these plastics brackets that guide the lock bar on the side to engage the lock when the window is closed

Casement operator and locking handle mechanism

Hello, looking to replace this operator. Need several. Many thanks.

Hi I need a replacement (preferably the whole system) for my window, number 30744. Window opens to the right.

I need one replacement casement window scissor hinge and handle. Let me know if you. Wed anything else if the pictures don't help. Thanks. Jim

The strip is made from a hard plastic and is v-shaped with a 1/4" flange coming out of one side. The V pulls apart and its sides are between 3/8" and 7/16". The flange fits into a groove on the underside of the window. The windows crank to open. They are 30 years old. I wouldnt mind a different m ... (cont.)

I would like a replacement that would work with this window crank in my house. I would like one that opens this way and three that open the other way. Please let me know if there is anything else that you need. Sincerely, Chris

Truth single arm window crank

Hello Swisco, I just spoke with Tim, who was very helpful. I need to replace this casement window operator on my parents' home from 1978, here in Minneapolis, Minnesota. I do not know the manufacturer of the window. Can you please help? I'm ready to place an order. Thanks! Bruce

One window is missing crank mechanism for window that opens to the left. I also need to two additional straight arms and crank for same type of window, one opens left the other opens right.

closure arm is 12" from roller end to bend in armclosure body is 4" at its widest, and 2-5/8"deep, photo prospective is off.I have other windows with similar closure, but shorter arm that I would be looking to replace also.Fell free to call me to discuss.

I can only find "truth" stamped on the arm of the crank. Looking to replace parts for 6 windows which I do not know the. Manafacturer.

Looking to see if you can cross or identify the part numbers needed so I can purchase from Swisco. Window Hinges is 10"need (see pictures/manf part numbers)for a left swinging window. Maybe Swisco 36-004-10? Window Cranks measured around 13" (Truth assembley - no part was visible) need one for a ... (cont.)

My window will open, but won't close. From my research it seems to be a stripped window crank. Just wondering what part I need.