Viewing all customer Discussions for:

39-031 EntryGard Dual Arm Operator

Hi, I need to replace the left and right side, could you please tell me what do I need to order. Thank you

Need to replace the crank mechanism, thr part the whole part the handle connects to.

I am looking to see if you have window operator for Kolbe casement windows. Attached are pictures of the operator. The Kolbe part numner is 5054390. Please advise. Thanks!

Hi, I have two roto operators that have failed. Both are marked EntryGard Truth. Both have smaller arm length of 4.5 inch and longer arm length of 9.5 inch:Right roto operator has 20810Left roto operator has 31538If you could let me know what parts to order, I would appreciate it. I also need a new ... (cont.)

Please help me with part numbers for a complete Installation/replacement for this 25-year-old window crank assembly, including new slides and any additional hardware needed.

I think your part number is Product Code: 39-031 EntryGard Dual Arm Operator but I am not sure so call me

This is a downstairs wood window that needs both left and right cover pieces for the operator as shown the labels say "truth" additionally, one of the cranks seems to have lost its threading with the gear so sometimes when closing the window the roller pops out from the track due to excessive force ... (cont.)

Jeldwen casement

Have 2 windows. 1 works ( took photos from that one ). Other windows doesn't open at all. Bought new crank but doesn't open. Would appreciate some help.

I just want to make sure as best I can to get, the right part

Two casement windows need Arms and Crank Assembly. One left and one right.

Looking for a replacement peice

The broken crank has a 9" arm and a smaller arm. The long arm is stamped Entry Gard Truth. I am hoping to only have to take this apart once but if you need a number or code tell me where I can find it and I will do my best.

EntryGrand Truth. No numbers found. See pictures attached. see new parts but want to make sure that right parts are ordered. the shaft worn and came out of and didn't engage with the gear wheel anymore.

The photos are of windows from a building constructed in 1981. No other part numbers. Just says Truth.

Hello i need this part

Hi there - I need to replace a broken crank on my Milard window, but have no idea what the part number is in order to purchase the corrrct one. The windows are from the mid 90's if that is helpful. Any advice or direction would be much appreciated.

GreetingsI have some windows that have been in the house for about 20 years. They are fine but the cranks have been striped. People tried to open them WITHOUT releasing the lock!!!! I m sending pictures in the hope that. you can recognize my need. I look forward to hearing from y ou. Thank youLydi ... (cont.)

Please see attached. Thank you, please see attached photosof each of 2 operators. The measurements of the pieces for each operating unit are as follows (inches): 5.75 11.5 8.0 And 4.5 11.5 9.0 Thank you.

The window opens fully but it won't close. I was under the impression that the Sprocketts ( not correct name ?) but the (Screws) were worn out and so the crank can't engage with the ( whatever it is called.