Viewing all customer Discussions for:

39-031 EntryGard Dual Arm Operator

Hi, I'm looking for a replacment for this part. Do you have anything like this. There are 2 arms attached to the control part and a separate 3rd arm that goes from the window to the house. Everything works except the crank auger keeps coming out of the cylinder. I have reshaped the cylinder end ... (cont.)

Hello, The handle threads and crank threads on my window crank have worn and the whole handle and shaft with parts needs replacing. I think the gears that turn to open the window are still in working order, if I turn them manually the window opens and closes.

Could you please help me identify the correct operator mechanism for a casement window?I’ve attached pics for reference. Thanks in advance for your help!

Hello, I need to replace this part plus the crank handle for several windows. please advice.

Replacement arm needed.

I'm not familiar with windows. Is this apparatus the only thing that holds the window on the bottom? When remove it I assume I need the window closed and locked - correct?

Left and right I need the complete assembly

I have 2 casement window cranks that are stripped and the retainer has popped out. Both windows swing out to the right, latches on the left. Stamped marking on the main body are 'Made in USA ', 'Truth' and 'Entry Gard' on the connecting arm. The house was built in 1989. The crank assembly looks ... (cont.)

I have an older crestline installed window. The crank is no longer working - can't open or close the window. It has a pin that should go in to line up with the gears so the crank will do it's work but I cannot get that back in to its correct place. I am wondering if I should just try to get a new cr ... (cont.)

I have one bar (arm) Truth hinges with the number 40942-A stamped on the bottom hinge. I'm assuming these are no longer being made (they are on 25+ years old Marvin windows). Does the 2 arm- Right Hand (Standard) Casement Window Hinge Assembled 10" replace the old one arm 40942-A. Will I need a ... (cont.)

Which operator do I need? Casement window is 27" wide. Short arm 4 7/16" Left handed. Is it returnable if the repair man to fix broken glass has an operator in stock?

9”-Long Arm The smaller piece has an extender-Without it extending its 5 3/4

I have a Crestline bay window and one of the side windows will no longer operate. No issue cranking window open but it won't close as it should.

Handle gear does not stay engaged when closing windows. Crank stop maybe broken. Looking for 2 replacement screw left and right side.

Hello dear, I have half dozen of these operators above not functioning properly as they keep skiding when being turned, please refer to photos & advise which parts I need to order & how to replace them. thanks.

I would like to purchase replacement window operators for casement windows. On the back of the long arm there is the number S-1081-102 On the curved part of the short arm there is the number S-1081-03 On the straight part of the short arm there is the number S-1081-66 On the back of the plasti ... (cont.)

long arm is 9"

I measured #20810 at 4 7/16 main arm 9 3/8 large numbers on part R30842. I could reuse the old crank and cover

Identifying #R30842 on arm close to crank #20810 on small arm

Need replacing them. Windows will open but not close.