Viewing all customer Discussions for:

39-031 EntryGard Dual Arm Operator

Need to replace r and l window crank . Number in back 30472RH. Number in front R30842

Need two parts both are for Kobe and Kobe casement windows. 1. Casement window operator pictures included. 2. Broken Escutcheon picture included

Is casement operator 309031 right-handed or left-handed? Crank handle on the R or L side?

This window opens to the left as looking from inside out. I need the bracket that screws to the bottom of the window (with the sliding plastic piece) and then hooks to the window arm. Pictures attached . . . I am nervous about removing the part without a replacement on hand. If it is necessary fo ... (cont.)

Photos hopefully provide distinctive markings Upper guide works Lower operating gears do not work Window brand appears to be Truth. Window frame is in ok shape.

These are 2004 Truth Entryguard mechanisms. I was wondering :1. Do these have an adjustment nut ? and do you sell the wrench so they cant be adjusted (the windows rub/sag and need small re-lignment needed.OR 2. What is a good replacement that can be adjusted ?It is my condo in NJ but I live in Fl ... (cont.)

Hello, first of all, trying to identify the make of these 15 yr old parts, and finding replacement for a right-hand and left-hand parts. Please advise. Thank you.

Hi , I ordered a while ago operator 20755 left and right but their not the correct part I measured the short you it looks like 4" center to center , it has a # R30824 it this helps , thanks Gary

Hello, I'd appreciate your help in identifying a broken window operator mechanism. It's a Truth Hardware piece. The long arm is 9.44" long and the short hand with the joint is 8" long. I'd appreciate it if you sent me a link to purchase a compatible window operator. Thanks, Lee

I need replacement for 31538 pictured above with measurements. Do you have?

Long Straight arm has 30470 LH on back Pivot arm has two numbers: 20810 and L30841 Baseplate hase 40471

Hi,We have windows with these closers. I would like to replace with the type of handles that fold up so we could possibly put in window coverings that are not the surface mount ones or curtains. Is there anything available?Thank you, Don

I don't have any more info other that they are truth windows

I am looking to replace both of the operators on my casement windows. One the gear units has completely strip and the other, I am sure, will be right behind it. The brand is Entry Guard. On the major arm there is a number 40754, on the minor 31538A, there is a 3rd number 20810A. On the base of the g ... (cont.)

We are looking for a replacement for a right and left window. The markings are below: L30841 Entry Gold - Truth 20810

Here are a couple of pictures of a 30+ year old Truth operator that no longer works. There's an identifier 30841L on the short arm. What replacement part would work? The link arm is a bit over 4 inches long. Thanks!

I need to see what these are and if you have them

I need this crank do you have 1 I can order

Hi, I dont know how to remove this but hope to figure it out when I get the new part. The only number I saw was 20810. Hope you can fix me up with the necessary parts to be able to close my window.Thanks,Steve

All I know is the the entry guard and truth msrkingd are on it. And I think the number20810 is what it reads . I appreciate response asap if possible thankyou