Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Hi. I am desperate for help. The mechanism to open and close my two bay windows broke. The handle doesn't crank. The arm seems to work but I dont know exactly what I need replaced.There is no names or numbers or markings found anywhere on the window to help me figure out who to contact. ... (cont.)

I have a bay casement window in my kitchen and the crank mechanisms are done on both sides so I am looking to replace. It appears that product 39-155 (and 156) are the mechanisms I need. Do you agree based on the photos I sent?

Will crank open, but will not crank back closed. The crank arm spins back out when trhying to close. I beleive the brand = "Truth"

Hello,I have two Crestline crankout windows that are faulty. They will crank open, but will not close. I have located part numbers on the "assembly". One has identifying marks saying EntryGard Truth 20810 and the other has EntryGard Truth 20810A. Each cranks opposite directions (left hand and right ... (cont.)

truth casement window long arm: 8.5"- 8.75" (still installed, difficult to get an arm-to-center measurement)short arm: slightly less than 4"hinge: 10"-11" (difficult to be exact with the rust)

Truth Hardware 10" 2 Right Swing 1 Left Swing

old windows Not known,

I need replacement cranks for Pella windows installed in early to mid-1980s.

I need to replace the window cranks on several of the casement windows in my home. I hope the photos attached give you enough info. to know what I need to buy.

Hi, I'm looking for a replacment for this part. Do you have anything like this. There are 2 arms attached to the control part and a separate 3rd arm that goes from the window to the house. Everything works except the crank auger keeps coming out of the cylinder. I have reshaped the cylinder end ... (cont.)

Hello, The handle threads and crank threads on my window crank have worn and the whole handle and shaft with parts needs replacing. I think the gears that turn to open the window are still in working order, if I turn them manually the window opens and closes.

Could you please help me identify the correct operator mechanism for a casement window?I’ve attached pics for reference. Thanks in advance for your help!

Hello, I need to replace this part plus the crank handle for several windows. please advice.

Replacement arm needed.

I'm not familiar with windows. Is this apparatus the only thing that holds the window on the bottom? When remove it I assume I need the window closed and locked - correct?

Left and right I need the complete assembly

I have 2 casement window cranks that are stripped and the retainer has popped out. Both windows swing out to the right, latches on the left. Stamped marking on the main body are 'Made in USA ', 'Truth' and 'Entry Gard' on the connecting arm. The house was built in 1989. The crank assembly looks ... (cont.)

I have an older crestline installed window. The crank is no longer working - can't open or close the window. It has a pin that should go in to line up with the gears so the crank will do it's work but I cannot get that back in to its correct place. I am wondering if I should just try to get a new cr ... (cont.)

I have one bar (arm) Truth hinges with the number 40942-A stamped on the bottom hinge. I'm assuming these are no longer being made (they are on 25+ years old Marvin windows). Does the 2 arm- Right Hand (Standard) Casement Window Hinge Assembled 10" replace the old one arm 40942-A. Will I need a ... (cont.)

Which operator do I need? Casement window is 27" wide. Short arm 4 7/16" Left handed. Is it returnable if the repair man to fix broken glass has an operator in stock?