Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

9”-Long Arm The smaller piece has an extender-Without it extending its 5 3/4

I have a Crestline bay window and one of the side windows will no longer operate. No issue cranking window open but it won't close as it should.

Handle gear does not stay engaged when closing windows. Crank stop maybe broken. Looking for 2 replacement screw left and right side.

Hello dear, I have half dozen of these operators above not functioning properly as they keep skiding when being turned, please refer to photos & advise which parts I need to order & how to replace them. thanks.

I would like to purchase replacement window operators for casement windows. On the back of the long arm there is the number S-1081-102 On the curved part of the short arm there is the number S-1081-03 On the straight part of the short arm there is the number S-1081-66 On the back of the plasti ... (cont.)

I measured #20810 at 4 7/16 main arm 9 3/8 large numbers on part R30842. I could reuse the old crank and cover

Identifying #R30842 on arm close to crank #20810 on small arm

Need replacing them. Windows will open but not close.

Hi, I need to replace the left and right side, could you please tell me what do I need to order. Thank you

Need to replace the crank mechanism, thr part the whole part the handle connects to.

I am looking to see if you have window operator for Kolbe casement windows. Attached are pictures of the operator. The Kolbe part numner is 5054390. Please advise. Thanks!

Hi, I have two roto operators that have failed. Both are marked EntryGard Truth. Both have smaller arm length of 4.5 inch and longer arm length of 9.5 inch:Right roto operator has 20810Left roto operator has 31538If you could let me know what parts to order, I would appreciate it. I also need a new ... (cont.)

I think your part number is Product Code: 39-031 EntryGard Dual Arm Operator but I am not sure so call me

This is a downstairs wood window that needs both left and right cover pieces for the operator as shown the labels say "truth" additionally, one of the cranks seems to have lost its threading with the gear so sometimes when closing the window the roller pops out from the track due to excessive force ... (cont.)

Jeldwen casement

Have 2 windows. 1 works ( took photos from that one ). Other windows doesn't open at all. Bought new crank but doesn't open. Would appreciate some help.

I just want to make sure as best I can to get, the right part

Two casement windows need Arms and Crank Assembly. One left and one right.

Looking for a replacement peice

The broken crank has a 9" arm and a smaller arm. The long arm is stamped Entry Gard Truth. I am hoping to only have to take this apart once but if you need a number or code tell me where I can find it and I will do my best.