Viewing all customer Discussions for:

39-056 Crossly Window Crank

No idea the manufacturer of these parts, Hurricane Milton blew the windows open and they are stuck open with no handles in place. I need 3 sets of handle cranks and idk if that includes the " handle casing/,box"?

Hello! One of our window cranks has broken and not sure exactly what/where to replace. I've included photos. Please let me know if you need anything else, thanks in advance!

I need your help identifying the correct low-profile replacement hardware for this case, crank, and levers. I want to install accordion blinds and these old crank boxes prohibit that.

Hello, good day. I was looking for some awning style crank out window parts. Lower sash vent lock. Upper sash vent lock. Late 70's early 80's. Pasco County, FL Please let me know if you can help. Thank you

I need to replace the casing for one of the windows. We use the crank to open, but it skips. I believe it's something in the mechanism of the casing. Windows were installed in 1971

1/4" treaded hole, I need 1 window crank and the bolt that goes into the treaded bracket

Bought one operator from doesn't really fit. Building built 1959 .

I can't seem to locate a match for this. The arm is 2 1/2 " Shoulder bolt is 5/16 - 18 thread. I don't see many that have a 2 1/2" arm that is configured the same. Home they are in was built in 1989. Any ideas? Thank you.

I ordered 39-025 but the holes don't line up. I believe this is a right hand awning crank. The old one only has one screw hole on the bottom plus another a little higher on the right.

Dural central oldpino # 218 Right hand

These louvered windows/jalousie operated windows are on my daughters enclosed back porch & some won't close and seem to be broken. Is there anyway to identify what parts may need to be replaced or how to fix these?

I need to potentially replace 6 of these operators on an older house. a few still work to a degree, but not many and they are very stiff. So much so that it would appear some have been forced previously to the point that they push back out of their mounts on the window. Any help would be greatly ... (cont.)

This is the crank that is on my small bathtub, shower window in one of my apartments. I'm not exactly sure when the building was built, but I do know there is a pink tub and sink in one of the apartments which indicates to me it was built 50s to 60

Original to 1970 house I believe. Crank handle is loose inside unit and will not screw back in, just loose. Windows don't open.

Need 2 rh and 2 lh cranks

Looking for help to replace the window crank and another part I might need. The windows do move freely.

From an appearance standpoint, we would like something white, obviously, to match the windows, and as unobtrusive as possible, such as your product code 39-376. .... don't know if that style will work. Please help us select the proper cranks.....we'll need a total of 10 of them. It looks similar ... (cont.)

The windows were installed in the then-new building in 1967. We believe they are Anderson windows. The frame is 23x39 We have 5 of these windows. If there is an option you may have, we'd like to try 1 out before purchasing the rest. I removed a different operator... Turns out, the first pics I s ... (cont.)

One section of arm has the number 2 stamped on it and the most extended part of arm has the number 78 punched on it.m Inside the housing is a Pat No. D-198 202 The arm extends 4 1/2 inches The housing is 6" from top to bottom It is dark in color I have ordered a crank from you before ... (cont.)

I need a RH window operator. On my handle there is a no. D-198202 n.s. RD 1963 Can. I guess they used that Pat No. for a lot of these operators. Everything I am looking at has different holes.