Viewing all customer Discussions for:

39-056 Crossly Window Crank

Hi,I'm having some trouble identifying the correct window operators for my application. I've attached some pictures but please let me know if I need to take additional measurements.Thanks!Albert

We are looking for a replacement window crank for our window and 'think' you may have what we need.The house was built in 1975 - and there are no manufacturer labels on our present window cranks.The crank is for a (righ opening window) 5 inches from top to bottom and the bottom holes are not straigh ... (cont.)

I took additional pictures. The additional pictures are attached to this e-mail. I hope that these additional pictures will help us determine which operator I need. Picture titled Window Crack 5, indicates the bottom holes on the window sill. I believe that the individual I hired to fix the ... (cont.)

Help me please, I'm in bergen County nj I broke 5 cranks for my windows

Looking for replacement window cranks for old aluminum windows

My window crank from my 1960s vintage awning windows(Photo1) The numbers inside the crank body are: AT.No. 198202 U.S. RD.1963.CAN Dimensions are very close, I have put them in White on a copy of your dimension photo(Photo2) As noted, the length of the 1 arm and the hole are the onl ... (cont.)

10-8201 stamped inside of assembly. I assume this is called a right hand crank? I would like to order one right hand crank assy. And one left hand assy. If they work I will order about 15 of each right and left assy.

Hi - thanks for this aid!! The first two pics are of the Guest Bathroom small shower window with a crank that works correctly. I found a part that looked somewhat like this on your site, but it said it was for a Wood Window. The third pic is the one that does not work - you can open the window, b ... (cont.)

There are no names or numbers anywhere on the windows. the straight bar hole to hole is 2 inches. top hole to middle hole is roughly 4.5 inches. Strait bar is threaded on the end for the screw. Please help. Whole housing is about 1 inches wide.

Wondering if the 39-056 is a suitable replacement. Thank you, Robert

Can not find any names, numbers markings.Windows probably from the 1960/70's This house is being restored. HELP

I took my part off the window and need help identifying a matching replacement. Your 39-054 looks like it would work, just need an extra set of eyes to confirm. Thanks.

Can you please advise the part number to the window crank in the attached photo, along with a link to it? The crank is stripped and will not close the window. Ed

I tried one by guessing 39-278 but was just wrong - almost but wrong screwholes/locations. Can you help me identify the correct replacement part? Thanks.

Looking to replace a few of these operators

Hello, I have a louver-style window that takes this type of crank, but is stripped. Unfortunately, whomever installed the tile around this window tiled right next to, and grouted over the edges of the crank housing and the screw heads. Is there any way to replace the "guts" of this crank (fro ... (cont.)

No manufacturers identification on handle. 5/14" center of top hole to center of bottom.

Hi, We are in need of this item, pictures attached below. I would really appreciate it if you could reply to this email or call

Thank you for having such a great web site. Trying to match the crank assy that I sent pictures, the 39-025 is very close but the bottom screw holes are offset a little and the connector arm is a hole and your looks like a pin. Please let me know if this is the closest or if you have a better ... (cont.)

I have some older louver windows which are starting to fail (they no longer close tight and air, dirt and bugs get in). I am attempting to locate replacement parts for repair. I have additional; photos but the upload limit is 5. Thanks, Ed