Viewing all customer Discussions for:

39-083 Dual Arm Crank, 21-1/2"

Replace the whole assembly. Pictured is a working crank.

I need to replace a truth operator comprised of the following part numbers: casting body 459002 that is 5" wide scissors arms 40510, 40511, 30895 (2) with total closed width =21.5" Which of your models do you recommend to replace this unit? I will also need a new crank to go with it. I would appreci ... (cont.)

Need replacement

Hi, I have 5 of these, all older. This one is shot. Will replace them all. Can you send me the part number and also replacement manual? Thank you!

I just purchased a house in Farmington hills Michigan. Most windows have these type of closing mechanisms took pictures that I saw but don't know what their replacements are. Can you please assist

I'm looking for a replacement dual-arm operator for a 1984 Oldcastle awning window. Info on the window: 27 72 3103 16 CFR 1201 CII ANSI Z97.1 - 1984

Please confirm correct part number. This is from a 36In wide hopper window. Center crank, approx 10 in arms. Circa 1990 (Bronze).

Looking for replacement arms/crank for patriot awning window. ty, Pat

Hi I am Jeff Bozem an electrical contractor from Los Angeles. A homeowner asked us trouble-shoot & repair/replace non working problems. We have traced problem to the TRUTH Hardware mechanical operators. I have included pics of actual unit...the following info is stamped on actual Hardware TRU ... (cont.)

Please see the pictures, the crank has come completely out and we can not figure out how to get the worm gear/crank lined up and how to tighten the screw that holds the shaft in. These are on my girlfriends windows so I have no history but it seems like the retaining piece (laying beside crank in pi ... (cont.)

Window opening size is 20 inches vertical 30 inches horizontal. Crank does not move window and is loose when turned. Numbers are DF 1100A; CCMC 9186; Brevet Can #1,160,103; Brevet USA #4,400,923; ????????A3,B3, C3.Side arms are ok.The window moves freely when pushed in or out by hand with the c ... (cont.)

We have 3 casement windows on which the cranks have all broken. I've attached pictures here (all 3 are identical). The mechanism on the windows themselves still work, but the cranks themselves are not working because the stem seems to have come apart from the base (I'm not sure if I'm using the ter ... (cont.)

Hi-I need to replace Truth awning window operator. Please help me choose the right part -housing-Truth 45002 -first golden arm have number 40007 -second arm 40008 -3rd and 4th are same number 300086 -across the arms when they are close is 21 1/2 inches

Need replacement, can you help?

Please help as the handle and the part that fits into the handle (and held in place by the screw plug) and down into the the fixed window frame fixture has all pulled out. One picture is of the two parts I need. (See "win cr5".)Thank you.Mike

I have a Truth 40078 dual arm with a crank that is labeled 1(possibly I)2 45054. The operator has broken on the inside, so I believe my only option is to replace. I have a couple of items in my cart, that look close, but I was wondering if you had any suggestions.

I am looking for a window crank Truth Hardware 21" Dual pull Roto-gear Awning Window Operator #30895A white color

The bracket on my awning window is disconnected from the operating arm. Is there a part that connects them? Please advise

Pictures of broken window operator, would like to know if replacement is available and make of unit.

Look for the guide or rail for crankout window. Cannot find the type of window. Thanks