Viewing all customer Discussions for:

Door & Window

I'm trying to find the replacement wheels for keller aluminum sliding windows, circa 1978. The wheel is steel and is 9/16" diameter and 3/16" wide. The axle is 5/32" diameter and nylon. Also how are these removed and replaced.

I could not locate any markings on the part or window. All window labels removed.

OUrs is stamped 29 5. Does that equate to 2950. The channel is 30" long.

Are these left and right ?

My handle for the glass front door broke and I cant find one that fits at the local store. Please help me.

White plastic piece at bottom of channel balancer. The only number on the channel is 2320. Other channels that are the same size say 2340.I need the stop that is on the sash that, when missing, allows the channel to spring up to the top. (photo in this post). Also need the bottom plastic piece tha ... (cont.)

I need help confirming which balance shoe I need. I?m not sure the difference between 15-195 and the 15-229.

Storm door interchangeable glass or screen is held in by 2 vinyl (??) strips along the frame sides, approx 73.5" long each side. You just press strips in and pry them out to install or remove them. Current pieces for the home we just bought are old and too brittle to be used much longer. Do not s ... (cont.)

Need to replace double hook mortise lock on my sliding patio door. Picture of existing hardware attached. Also sent two pictures of the stickers on the door. Can't figure out the door manufacturer but I'm hoping you might be able to? Any help would be appreciated.

Looking for these parts to repair windows that won't stay up.

I bought the 82-033 that looks just like my old one. I have a few problems though. 1. The inside handle has bumps on the part that sits flush with the door where the screws go in which means it doesn't sit flat, there is a gap making the handle not as strong or stable. My old one had a flat surface ... (cont.)

I have removed the retainer screws for my series 2000 PGT sliding glass door, but cannot get the roller out of the door. I can't tell what is holding it in due to the felt. Any suggestions.

Need help finding a suitable replacement sash guide. Have yet to find similar measurements on a replacement part.

Need to find the correct awning operator to replace this.

I have several double hung vinyl windows where one or both pivot locks are broken. I tried uploading picture but your red button doesn't do anything. I don't know the window make or brand. They're coil sashes. I found a patent number on one of the pivot locks: 4.610.108. Can you help me identify ... (cont.)

I'm trying to replace this mortised lock set which has a pocket of about 6 inches. Do you have anything that will fit? Mike

I purchased a house that was missing the handle to a sliding glass door. There are two doors next to each other and I would like to find a match to what is on the other door. I am hoping you can help

looking for P/N for Anderson 2852 balancer both L&R

Manufacturer is out of business, cannot find replacement part.

Manufacturer?