Viewing all customer Discussions for:

Door & Window

Photo shows stamped info on my failed Pella single hung window sash pulley assembly. Total length of metal assembly is 32". Hoping you can confirm part(s) required to replace this? Thanks.

No name or part #. Windows are in a condo in Florida. Looks like your 55-206 but top width is 1/2"

Ghetty Chila, pa

Gap is 5/8" wide x 5/8" deep

B S I 649 and the number 022106 are stamped on the back

broken spring and rusted tilting slides 14" total length How do I remove the slider?

Here are 3 photos and the measurements between holes, so that you can let me know what part number I need to order. The distance between the two bottom holes is 1.125" Center to Center The distance between the top and bottom hole looks like 5.25" Center to Center My first guess was that I need ... (cont.)

I am looking to replace this crank operator. it is 5" 14/16 inches end to end. the box part is 4.25 inches. It unit is unusual in that the screw brackets are oriented differently on each end.

My back door storm door lock is not working so I have uploaded three photos for you to help me decide if part number 40-193 Pelli storm door Morris handsets is the correct part I should order

The body is approximately 3-1/16" long, 11/16" wide, 1" high, overall length from the edge of roller to back of adjustment screw is 4-1/4". The hole on top is 1-1/8" from the back.

Hi Great video on removing the lower frame section. I need to do this on some sliding doors I have. I was wondering if you could show a video of replacing the frame section after the roller and carriage has been replaced. I wonder of the difficulty of getting the spline and glass and frame back toge ... (cont.)

Need trim for this whole sliding door. It's dried out and cracking. No markings that I can find. Don't know who did the doors. Home built around 2003.

String in pullybsystem broke. Looking fir balancer replacement. Phillips Stayton 07:51 L#1 E2190 stamped inside.

I have a white spiral balance with 34 inches of length and 1/2 in dia. The window is fairly large tilt window and quite heavy. What color rating should I use.

I need the part number for the locking mechanism for this window .The only part number I have is 4980947. Thank you

I have a metal storm door with removable glass panels. At the top corners there are white plastic pieces that fit in the door track that allowing the panel to slide up and down. I need to find those corner pieces.

These parts all came from a replacement window that was made on site in a high-rise residential apartment building in Buffalo NY. Need to replace the window, but need to find these parts due to them being broken. Any and all information would be great, and we would also look to get pricing infor ... (cont.)

Need balances for two windows.

Hello, I need a couple of Tie bars. Approximate length is 24 inches each. Attached pictures are to give you an idea of the Tie bars from a longer size window. So the length of the Tie Bar in the picture is little longer than what I actually need. And because of the length of the Tie bar of the pict ... (cont.)

I need replacement rollers for sliding glass door. Photos are of one the rollers out of the door.