Viewing all customer Discussions for:

Door & Window

This is a double glass patio door with top and bottom locks that hold one side closed. Both top and bottom are rusted. lock is 7" long and 3/4 wide it is a french door. Thanks.

I have a client that needs some replacement parts shown in the photos above. The only information I can find is AMS Norco Windows-D Series Clad Case/AWN Jel-N-330. Please let me know if you have something similar and the costs. Thanks for your help! Alan

Pix is from a 1940 double hung window

This is the left spring / corded tilt window mechanism. The lower pulley broke. I expect i need a total replacement. Note window 3 is the attachment for the lock mechanism still in the window.....i can move it to a new cord if required. Suggestions?? Thanks

Looking for these parts Vs 6a was on the window,Here is what I found

Hello, do you have or know of a direct replacement for the pictured part? It is a drawer stop from a dresser made by American signature. I tried your part no 32-125 and it doesn't quite do the trick as the drawer can still pull completely out. Thanks for the help!

Can you help identify replacement parts for the coil balance etc in the attached pictures? Thank you

I need an interior handle for a Legance 3 patio door

My metal channel is labeled 27B USB which is 9/16 wide(1/2)and 28 inches long. It appears that your Series 745 Peachtree Ariel 27" is the correct replacement. Is this correct before I order? Many Thanks, Jim

I'm desperately trying to find this balance. I know now that it's called a constant force balance. I was screwed over by a window manufacturer, called Premium Windows and doors from Pico Rivera, CA. They were setting up a new branch in Atlanta and I paid for windows from them. They installed and ... (cont.)

I have a removed BB with 1-1/2" O.D. from roller assembly. And my window frame shows the fastener hole is located lower than adjustable screw like Product Code 81-154 with 1-1/4" diameter. Do you have one with 1-1/2"? Thank you

I am having a little trouble with identifying this spring and shoe - the height of the window in total is about 41 inches - so I am not sure that I need something with a 40 inch travel because of the space at the top ? No stamping on the springs and the shoes I can't tell if they are part of the spr ... (cont.)

Please help me identify the part # of my top sash guide, based on the photos provided. If you need any additional information, you can give me a call or just reply to this email.

Please review the photos and let me know which parts could be used as a replacement

I'm not sure if this is hinge is a product that you make, maybe an older version?

I am trying to order the correct window channel balances for my single-hung, tilting windows. The channel balance is stamped 34D and measures 34" x 1/2" x 1/2". I can see balances that look the same, but the pivot ends look very different from ours. Can you help? I will need two of this size bala ... (cont.)

Hi Will Keller Window Lock # 90-031 work with 90-178 or is 90-176 a better match. Regards

Can you recommend a replacement?

What are dimensions of Product Code: 55-006

The windows were installed as replacements, previous owner had them installed. These were the type they cut out old window and glue new windows in than out side is wrapped in Aluminum. The only information I found on the windows is a gold sticker Series: DH PAV2 Type: Vertical Slider Code: 213 ... (cont.)