Viewing all customer Discussions for:

Door & Window

I am looking for replacement for Truth 45034LH... (3x) part 39028(left side crank) looks like exact replacement, is it available? I also looked at Ellipse 39-027E which has same measurements... Then saw Offset39-412, which also has correct measurements. Which is right for me? Wha ... (cont.)

I am in need of finger latches and I believe the one pictured above is what I need I included a pic so you can see what I am talking about Can you give me a price I am going tp need about about 2 dozen but would like to just get one for now to make sure I have the right thing Thank you for your h ... (cont.)

This part is located on the hinge side of tall casement windows. The post mounts on inside of the window frame and projects though a hole in the sash serving to align the sash with the frame and keep it from warping. The part is white plastic, tapered to almost a point and is about 7/16" diameter a ... (cont.)

The spring connector broke, the piece measures 28 inches in all, the metal part being just under 27 inches, depth is 9/16 width is 5/8 , if you can recommend the correct part I would be very thankfull

Good evening. The channel. Alance on my mother-in-law's aluminum double paned window broke. It is stsmped as a Caldwell 27-4 KL. There are no other standings or markings on the unit, and the metal portion measures 28" long. It looks like the clip that secures the balance to the bottom off the window ... (cont.)

I need to replace 6-8 Channel Balances for my Atrium Windows. I think the Atrium part # is 5W12Balance. They are 1/2 inches in width and 30 inches long and stamped with the #2940 on them.

Hi , I am looking to replace 4 broken pivot shoes for replacement windows 1 1/4 wide 9/16 thick 2" tall

I am trying to locate this particular tilt latch for an older Kohler window. Any suggestions?

The existing balances have a metal channel that is 21" long, and 1/2 " wide. The part number stamped on it is "2030 DL". I have provided photos of the part and the plastic ends. When installed, these parts cannot be seen. Please let me know if you have replacements for these. I will need 6 or ... (cont.)

This thing that holds window up cracked and fell down and now window must be propped open. The second picture shows on a window that is not broken all you can see is bottom edge of the piece.

Good day, I recently bought some window balances 23" Series 395 Channel Balance S395-23, option: 2240. At least one of my windows is missing the plastic piece, in the window itself, that holds the top pf the balance in place. Do you sell these? Thank you, Eric

I need two balances to replace old balances marked 86 15-3 AB5CMC..

Hello, Just moved into a home. Seems some of the windows will not stay up. Looks like the window shoes may have broken (see attached pics). The windows do not have any sort of brand marking on them so I do not know what it is. I am not sure what type of shoe or coil I need or the poundage it may be ... (cont.)

Can you get your S 795-14c channel balance with your 15-198 clip?

I need to replace the coil balance in a TRACO window. How do I know what "lb" coil I need? I got the spring out. It's a 7# 35" CMC 408. Attached is a picture of the part. Is this the tandem coil housing 15-086? Do I only need a new spring?

Have you seen these balances before and do you carry these?

Looking to repair a window that has missing balance hardware. The bottom sash will lock in, but the balance is missing to provide tension moving it up and down. The vinyl window is 60" tall. Provided a photo of the existing hardware that the window secures to. What do I need? Thanks! ... (cont.)

The channel balance on my 34" wide Jeld Wen window has the markings, 26 4 GU CMC 4 I have figured out from your recent comments that I probably need a 27" series 350 balance, but I do not know which option to choose regarding the strength of the channel balance. I have included 2 photos. ... (cont.)

The windows are 21 years old. The name on the latch is Alenco. The rubber piece when flattened is the same width as the piece it sits on which is 5/16 of an inch. At that point the piece wraps down 3/16 of an inch and then into a groove

HiNeed your help to identify the following sash window balance springs:1) "29 5 JQ CALDWELL" [metal shaft measures 30" x 5/8" x 9/16"2) "28 5 KP CALDWELL" [metal shaft measures 29" x 5/8" x 9/16"3) "25 5 JQ CALDWELL" [metal shaft measures 26" x 5/8" x 9/16"There are no other markings on the shafts b ... (cont.)