Viewing all customer Discussions for:

Door & Window

My operator hole vertical centers are 5-3/16 to 5-1/4 (hard to tell). The bottom horizontal hole centers are 1-1/8.The link is 1-3/16, with a 5/16 bushing with a FH 10-24 screw in it. It has been years since I tool one apart, but I think there might be a nylon bushing that goes on top of it. I am re ... (cont.)

need help identifying the parts needed to replace what appears to be an issue w/ the crank. please refer to IMG_3048 for a picture of the broken part. please refer to IMG_3044 for a picture of a like window in my home that is operational.

I have a rh awning window operator to replace. Do not know the brand. Holes on operator are 5-1/4" c/c, bottom holes are 1-1/4" c/c. overall length of arm is approx. 6-3/8" overall length of arm that connects to window is 3-1/4" with 2-1/2" between the connector that allows it to bend and a bushing ... (cont.)

Channel balance spring end caps for aluminum frame double hung non-tilt windows are breaking. Probably 1975 vintage. Stamp on channel spring cover is 2320. Plastic/nylon end caps are attached with a metal bar and do not seem to be detachable. No brand identifiers on window. Contractor grade? ... (cont.)

Not sure where to really start with this as I'm a new homeowner. I had one window that doesn't really have issues going up and down or staying up, but the window balancer on the right-hand side just falls to the bottom of the window. I can easily pull it completely out as it doesn't even seem to be ... (cont.)

My name is Jeanne,

This window is from Morco and is about 30 years old The coil spring that is contained in the slider pictured in # 1 broke. It measures 5 inches long and has a 3/4 inch diameter. Do you have a replacement for this coil spring? Please advise Thank you.

Came from and older casement window, the threads are worn down. No markings on the piece. Please help me find the replacement part.

1/2 inch wide - 24 inch long back of aluminum contains "2330" Need part numbers to order replacement for both sides of 1 window.

The label on the latch says 'Truth'. My window is 47" high X 28" wide. The latch is the right hand side window. It is locked now and I cannot open it.

Hi, I do not know what its the stamp option for my windows since my stamp does not match any of the stamp options. my channel balance has printed C 24 2 for the big window and for the small window C 24 1. I do not know what is the proper balance that I need to buy. Could you please help me with th ... (cont.)

I don't understand how to select correct Series for my replacement Balance. Metal is 21" and thickness is 1/2"

Hello, I have a Milgard sliding door: series 5621/5631; SGD-C30-96 x 96. Someone managed to break the door handle. I disassembled it and am looking for the part shown in red (circled on your product photos) that inserts into the square opening (also circled in red with an arrow). What is the na ... (cont.)

Located at the bottom left of the lower window. The edge of the part in the picture broke off.

Do you have matching part for Viking snap-in window bead attached? Each leg dimension is about 5/8 inch and dimension across open bottom is about 13/16 inch. color: black, window frame: aluminum. Thank you.

I'm looking for a replacement for Andersen Operator Set - Short Arm, Amerock / Roto - Lock, 1959 - 1981 Part Number: 0333808, will the 39-389 work??

My window screen frame was destroyed. I'm trying to find a replacement one but have no idea what this latch is called. I don't know what to call it and this is the only picture I found that looks similar to it. When I try to look up latches I see pins with springs, tabs and all other types of hardwa ... (cont.)

Looking to find new socket to replace broken one

I have 4 of these to replace Mirror closet doors

pulled this well worn roller assembly out of a 1960 vintage sliding glass door, any idea if one of the available replacement units would work? I'm assuming the only way I could find this exact unit would be salvage from a similar vintage door.... thanks for any help