Viewing all customer Discussions for:

Door & Window

The thumb lock broke on this patio door latch. I believe there are some parts that broke inside the strike bolt mechanism on the edge of the door. to describe the parts the side handle is 22 inches long and 1 1/4 inches wide at the base. The door piece on the edge of the door is 11 11/16 long and th ... (cont.)

I am looking for this style of shim in the photo… Do you carry those I would need four

The broken crank has a 9" arm and a smaller arm. The long arm is stamped Entry Gard Truth. I am hoping to only have to take this apart once but if you need a number or code tell me where I can find it and I will do my best.

The door handle on my interor sliding glass door is broken. There is a locking lever just under the handle plate. Info. CAN/CGSB-12-1M ANSI Z-97-1. 1984 SGCC 16CFR1201. 1/80 GOC 250. 60123303

As seen in pics I missing the faceplate that allows me to lock my screen door. Lock is fine and working, just can't find the plate that will allow it to lock. Old 70's building and no identifying manufacturer. Thank you in advance

The rod is broken that the sliding glass door slides on.

I have this casement window which was installed before I bought the home. It seems I miss a small piece to keep the handle on the system. The first picture is the current issue, the second, with white paint on it, has the small steel piece that helps hold the handle.

Would like to purchase a left and right coil window balancer 6 pound, this is the picture of what it looks like.

We are looking for replacment latches for several of the windows in our dorms, probably installed in 1968, the hinge hardware says Anderberg LA Calif , US Pat #3.345.777. but the part we need is the dual latch assembly , see the pictures. in many cases the latch is just worn out from use or the la ... (cont.)

Looking for part

Trying to find this clip. Do you have something similar? Thanks

Need help with these. They are out of an older PGT aluminum frame window .

Aluminum slider, older model with no brand name. Looking for replacement wheels. Carriage and wheel are steel. Wheel is concave. You have to disassemble frame and wheel carriage slides in from end. There are two rectangular divot holes to hold it in place. Wheel is around 1/4" wide and about 1 1/4" ... (cont.)

The channels are 27" from end to end. I have 6 of these that I need to replace. Each one is the same as the other. The windows are Milguard I believe - see latch on the top in picture. If i can get the right part, I can install them myself.

I need a window slide/Pivot Lock Shoe for a OC window but I'm not sure which one I need to order.It looks like Part# 15-177 but I'm not quite sure.Product Code: 15-177Coil Balance Shoe, Slate BlueSee Pics and Hardware store receipt for more info.Thanks.Rick

Hello. I have broken the plastic piece that holds the metal In the window jam that you put the bottom of your tilted windows in with the metal post that is on the actual window itself. I have sent pictures. Can you help me identify this or find Fix this?

Do you have this black tilt latch in stock 3 and 1/2 in Long by 1 in and 1/4 wide I need between 20 and 40 pieces.

This is a right hand TRUTH window crank, it has the number 30710 stamped in the center of the crank. I have included pictures of the crank. Thank You.

It's from a single hung window

The number stamped on this part is 320bs1