Viewing all customer Discussions for:

Door & Window

I have found nothing on windows.. these are vinyl that is all i know...I have about 4 windows 59" X 47". Thanks - Arifan

Hi, I am looking for a set of channel balance. It has 2530 BS 0 or C on engraved. The window is about 70 inches by 30 inches. The width and depth is about 15mm. On the left side of the window is the balance is attached to the window which is broken. Can you recommend which part are required for this ... (cont.)

Manufacturer Alpine Height of visible glass = 12.5" Width of visible glass = 17" weight of glass window 8-9 lbs This is not a tilt window need new balance as the one for this window is missing - I believe it's a channel type of balance

I am in the process of purchasing barn door hardware and will be installing doors on this hardware. Best my contractor and I can guess - I will have 1/2" gap when the doors are closed (or pulled together.) The space has to be there to allow for clearance as the door slides. I am wondering about p ... (cont.)

I need replacement for 3 broken Multi-Point Lock actuator. It has no manufacturer name or part number, but other hardware on the casement window says ROTO or TRUTH.

Hi, I need to replace the popup stopper at the bottom frame of a Certainteed window. It's those things you push down and lock in place to allow window to open all the way. And if you slide and pop it up then it will allow windows to open just a little bit. Please see the attached picture. ... (cont.)

This piece is roughly 1-1/4 inches wide at the base and roughly 1-3/4 inches long before it angles up about 1-1/2 inches.

Do you have replace handles like those attached? The hole in the window is 5/8 in high by 2 7/8 in wide.

Replacement Andersen window sash balance. R19-927. Also stamped 5-88, which I assume is the manufacture date. Window has CIG-2-3-88 etched on it with "high performance".

Need window sash pivot pin from a Dove window mfg app 2008. Bottom window for a double hung. Can you Please help thanks

Hello, i am looking for this part for our school windows. I think I found it on your webpage, Truth hardware pivot slide assembly and the truth detach clip. I just wanted to make sure these were the parts i was looking for. Thank you, Dan Stover

The wheel dia is 30 mm, and the with is 7 mm , I need 4 pcs of the wheels, but i dont mind buying a part that has the wheel mounted (as long as I can use the wheels). Hope you can help me , reg Ivar

I need Anderson window balances ( Left and right) for my double hung windows that I installed in the mid 1970's. 11600-2 C716 #23282 is readily seen on the right one while the left one seems to read C7167 #2312 but is really hard to see. window opening is 37 1/2 inches. Any ideas? IT's seized up so ... (cont.)

Not sure what brand of windows we have. Windows are probably 26 years old. The part is either nylon or Teflon 3/4"x5/8"x5/8". There are no markings on the part. It is used to connect the sash cord on the balance system to the window sash. It moves within the guides that are attached to the side jams ... (cont.)

the latch has no numbers or markings length 2 5/16 wide 3 quarters

This fork style lock handle controls the wooden casement style windows in our bay window. Half of the fork has broken off, so now we cannot lock/unlock the windows, as we were only given one to control both. The stamp on the fork says "construction handle." Is there a non-plastic option that can ... (cont.)

I need help with this plastic part. What other information do you need to be able to help me?

Looking for a replacement of this lock

Dear Swisco, I am trying to replace the spiral balances on a couple BetterBilt single hung windows. See photos below. I can

This part belongs to a metal storm door with window. Window goes up and down. This is one of two side guides that guide the window to go up and down. Without this part the window will flip out