Viewing all customer Discussions for:

Door & Window

sliding window roller replacement piece. it is 1/4' wide, 1'1/6 inch long, one roller, 5/16 high on one side of roller and other side is same height but with a "ledge" with 1/4" height beneath it. comes from sliding windows put in during the mid 1970's. Thanks. oh, these are all nylong, black ... (cont.)

Hi I have removed a pet insert that was glued into the left frame of my pella sliding patio door. The door never closed before and after removal I can see that there probably once was a keeper for the lock. I was not able to find the model of the sliding door and hope someone can help me to fin ... (cont.)

There are no markings on this unit at all. The door was originally purchased at Home Depot (more than 10 years ago) and they currently do not have a locket that matches this one. I'm just trying to find a replacement without having to replace the whole door. Thanksl

From the picture available my part matches your 38-139 100%. However, your picture does not include vertical distance between the screw holes. What is the distance between the screw holes?

Hi, I need to find some snap-in beading for these windows from 1999 but the manufacturer has filed for bankruptcy. Can you help me identify a part number?

Question for tension spring for screen. I have windows and screens that have tension bars with small pins attached to them that poke through the screen frame which then holds the screen into the window frame itself. These small pins have broken off the plastic tension bars on many windows. ... (cont.)

I have a crank windows with truth hardware . I need one left crank and one right crank. As you can see from the pictures one is missing all the parts and one has part of the crank. I would like to buy two new ones, (1) for left and (1) for right . Can you help me? Thank you,Cindy ... (cont.)

No markings are noted on the parts, these are shoot and would rather not have to replace the entire door. If the pictures are not clear I can try to tAke more. Thank you, Mathieu

Do you have a strip for Pella double French Sliding Doors? It is a black at the the inside door side corner that has a shape of small L.

Single hung window does not hold position when opened. The sliding portion of the window appears to rotate then slip from balance. Wondering if replacing the top sash guide would remedy the problem.

Hi, I'm trying to find this type of locking mechanism for my sliding glass door. Screw holes are 3 3/4" on center. Your 82-261 looks like the closest match. Except that the screw holes are a little off. Can I redrill my door to make this fit? It's a keyed lock. Thanks!

32" Series 775 Balance Product Code: S775-32 Since my shoes are what are broken, I'm wondering if I can measure the channel that they slide in. If so, does there need to be some space between each side of the foot and the channel walls. Reason I ask is two of them were jammed at botto ... (cont.)

I have found what I beleive is the correct replacement balance. It appears to be your P/N S380-37 It is stamped with the number 3650 and the letters 'BSI". Per the attached I also need the Sash guides shown P/N 900-18140W which i could not find on on your website. Please advise Than ... (cont.)

I am replacing a balancer for a customer. it is stamped as a 20-32 and I do not see that as a option. should I use 2030 or 2040

Need help identifying & purchasing replacement part for Cardaco 20755/10577 stamped window crank operator. Only the hand crank housing is broken, see picture, the plastic on the hardware housing is cracked and stripped. Thank you for your help! -Jennifer

I am looking for some replacement window tilt latches. I have attached a picture. The measurements are 3

I've got a 2-3/4" sash pivot bar that I am trying to find a replacement for. it has one hole centered at about 1-5/32" from the tapered end (about 1-3/8" from the circular side). I need 8 of these if you can find them.There is a "6" stamped on one side of the bar.

It looks as though I have a #15-175 coil balance shoe: however the spring has the letter B stamped on it. I would like to know what spring to use.The window is about 33x47 in. I also have another window that is about 31x32 in. but I have not looked at this window to see what is stamped on the spring ... (cont.)

I need both complete hinges for this Kawneer door. it swings out to the right

Need 28-3' pieces if you can identify it