Viewing all customer Discussions for:

Door & Window

Hello, I would like to order replacement tilt latches for my vinyl windows. The plastic is old and brittle, and the latches are all breaking. I cannot find an obvious replacement on your website. The dimensions are: 2 5/8" x 11/16" x 7/16" The latch has a groove to fit into a slot in the ... (cont.)

Do you carry a replacement for this roller? DEL MAR ENG LONG BEACH, CAL. PAT. 3.670.357

Looking to replace a set of springs as pictures, I can p/u the parts-thanks

I am looking for identification of this balance. length is 24 inches (channel only) and has a 19-005 top, and a 15-002 bottom. 1/2 inch channel width. I know that top and bottom numbers are correct, I have ordered replacements for a different (larger) window in the past, and these are the sam ... (cont.)

hi im trying to identify weep hole covers fitted to simonton aluminium sliding windows fitted in 04 their productref is 9032531 they say they are no longer in production the meseurement between insert lugs is 2 ins i need 12 no await your response t Thanks

I need to replace a Patio Sliding Door handle. Would you please see if you have what I need to get this fixed? Length: 7 7/16" Width: 1 3/16" Hole to Hole: 6 7/8" Identifying piece on the Door handle is "Daryl" and #s on the interior are 15049 for inside piece and 15047 for outside piece. ... (cont.)

I need a new lock

I have 2 Pella Storm Doors -- installed a number of years ago (about 5 years?). Within the first 2 years, the door used the most had the mortise lock no longer working (it's been duct taped ever since so the door can still open close but the mechanism does not work and was never replaced). Recently, ... (cont.)

Could you help me identify the correct replacement for the Non-Tilt Window Channel Balance in the attached photos? It's a 1/2" channel width and the length of the metal portion is 23". The sash is vinyl and weights 25 lbs. The top appears to be a 19-002 but I'm not sure about the type of sh ... (cont.)

I need 2 constant force window balances for a Masterview 3-0 x 6-0 single hung window, coils and reels. Please call asap Thank You Dan

THIS LOOKS TO ME LIKE YOUR Moss 84-095/can you confirm? Thank you, Al

Please confirm channel balance parts for 30 inch long by 1/2 inch wide excluding plastic ends. The part has stamp 29-9 AA CMC 11. This is for Norandex window. Need for the right side. Also need a white sash which I believe is part 18-161 5/8 also for the right side of window . Note the left channel ... (cont.)

I have 2 different windows weights and need to know if I need different parts for the heaver windows. The broken part number in the photo 12:10:58 09/23/04 Unique Balance 27F All of the broken balance measures 28" long with the U shaped channel 1/2" X 1/2" There are two windows sizes with diff ... (cont.)

I am looking for replacements channel spring balances or parts. The Canadian installation company, Ducana Windows, has gone bankrupt and we are having trouble finding anyone who deals with the parts to repair the windows. I manage an office building with over 100 of these windows and am in des ... (cont.)

Hi, I'm looking for a replacement for the attached pictured casement handle with a metal handle. I think the 38-138 is pretty close, but would like your opinion. I'm not sure of the brand of the window. Thanks, -Ray

The metal portion of the balance is 27" long and 1/2" wide. The top is 15/16" wide (back spring side), 9/16" wide (front solid/printed side) and 3/4" deep. The bottom shoe is 15/16" wide (back spring side), 9/16" wide (front solid/printed side) and 1 & 1/16" deep. The window is hard to ... (cont.)

We have failing block and tackle balances in 3 windows and I think I've found the ones we need on your website. However, I know VERY little about windows and have a question: we have single hung windows, a block and tackle balance on each side so do we have to replace both balances in the failing wi ... (cont.)

I purchased the 350 series 27" balances for a non-tilt aluminum window and I am having trouble finding the top sash guides that match the broken guide that I removed from window. Any suggestions? Thank you,

I have a sliding 52 inch wide window x 30 inch high. The shoe and top are 7/8 inch wide that fits in the window slide channel. The metal balance is 30 inches long (metal part) and Marked BSI ME 2940. Another one of my windows is the same dimension but marked BSI ME 2930. I think I would rather c ... (cont.)

I am having trouble finding a replacement for the the handle and lock on my sliding door. The handle has a patent No.919213 and part number 3596954 stamped into it which has led me to your company Swisco via the internet. Pictures are attached. Any information would be extremely helpful. ... (cont.)