Viewing all customer Discussions for:

Door & Window

The Harvey folks suggested I contact you for the replacement hardware. Please refer to the note below and attached pictures. I did not note anything that matched your on-line catalog selection. The wide of the latch is around 0.8 inches and the length is around 3.5 inches. The bottom design is also ... (cont.)

Interesting in replacing handle set for our white Anderson Window sliding door (Dec 1994 stamped on door edge). Attached is a picture. The numbers PS11 6R OPER or PSII 6R OPER also stamped on door edge. Measurements are approx 7 5/8” total length, and approx 5 ½” screw hole center to center . ... (cont.)

For a Benada Tilting double hung window. Size Hole: 3/16w x 1 1/16 high. Stop: 1/4w x 1 1/4 high.

I believe I found the correct replacement glass door rollers(81-090)to replace my broken rollers. My question is can these type of rollers be pulled out from the bottom of the door without removing the bottom frame from the glass? They do not look to be held in by any other hardware, just look ... (cont.)

Looking for this window part. Have you seen anything like this? It is from an Oran window, which is out of business. Paul

I am trying to replace a roller for a manix sliding window. The roller assemble seems to have the same dimensions as the Acorn Sliding door tandem roller assembly 81-030, with the exception of the 3/4" thickness. The one took from an existing window has a 1/2" thickness. will the 81-030 work? Do ... (cont.)

We are replacing 14 double hung wood sash windows in a 100 year old church. The weight of the windows is changing because we are installing laminated glass. The sash height is 26 1/2 to 26 11/16. The weight of the of the sashes is 24 to 26 1/2 lbs. I need help with correct length and tip color. We w ... (cont.)

This secondary patio door limiter appears to be in white, does it also come in bronze?

I need one of the plastic clips that goes into the square hole in the window frame that the top balance screw goes into. Not sure if I see what I need online here. It's a little, maybe 1/4" x 1/4" square hole punched into the window frame side, that is supposed to have a clip with a round hole in ... (cont.)

need to replace this part to my vinyl window...not sure what your part name is.

My balancers look like the 380 series. The metal part is 17" long and is stamped with 16E USB. The sash weighs 22lbs. It looks like the balancers only go up to 19 lbs, though. Do you have one that will work for me?

1/2" wide, 30" long (metal only), Non-tilt channel balance 29-9 FA2 CMC 9

Hello, I am trying to locate the problem which is preventing me to be able to close my window. The crank, once put inside the crank box will allow me to open the window but when you want to close it the crank just turns, turns and turns it doesn't catch to the inside crank to allow it to come b ... (cont.)

I believe that I have a Series 351 with a 15-002 Shoe and a 19-002 Top. Please see photos to verify. It is hard to see the difference between the 15-002 and the 15-001 Shoes in your photos. The Top & Shoe are almost the same color with the Shoe being slightly more yellow. The only marking is "2 ... (cont.)

The ACORN window latch has 2 screws and is 1 3/4 inch long by 1 1/4 inches wide. Pictures attached.

Can you identify your glazing bead part numbers for this mfg? Series 400/775/800/2000 (mfg 1989) Atrium Aluminum Products AB-1

I like the look and shape of your T Spline. It seems that it would be easier to install and stay in place better than other types. Can it be used in place of the flat type for repairing and replacing screens on a pool enclosure?

I need to replace Anderson balances. Old balances are stamped S181031 5 88. Do I use the current balance 24-1033? Mick

Hi, This window pivot (that I broke pretty badly trying to extract from the window frame) came from a Home Depot vinyl replacement window (American Craftsman 8500, circa 1998). Can you help me find the closest replacement part? Thanks!

Dear Swisco, How darker is the view looking out the sun screen mesh v. the standard fiberglass mesh? i like the thought of the sun screen because we have great southern exposure but do not want to reduce the beautiful view we currently have. Thx, PK