Viewing all customer Discussions for:

Drawer & Cabinet

drawer track back plate. The part# on our broken bracket is 471037. The piece has two knobs that fit into the wall. The piece is not screwed in.

please identify this bracket

Attached are pictures of the part Blum European face frame / austhia/ 70.255 -01/ 198.660-01.22

Hi I have these slide mechanisms on my cabinet drawers, & I'm stumped on how to adjust them so my drawer fronts will be level. I find I have a lot of play in the actual rail that the drawer sits on on only one side. Is it possible it needs to be replaced? Do you have any idea how to adjust these par ... (cont.)

My runners are broken on some of my dresser drawers as well as the sockets. I am going to replace the sockets with the heavy duty ones. After watching your videos, I am wondering if the case runner is necessary with the heavy duty sockets. Please advise.

I measured my back guide as having an inside opening of 1 1/4" by 1/2". 32-118 seems to fit the bill except for the height of 5/16". However, it looks like there is a center rib support that could be knocked out (or using a Dremel, cut out). Is this wise? Or does a deeper guide exist. I cou ... (cont.)

I was looking on your website and it appears that you have a hinge that matches up with an old hinge I have (#3391420). I

Can this soft close adapter be used on drawers?

Just wondering if any other brackets might work out. It's the usual 1" slider. Thanks Brent

Hi, I am having trouble identifying and purchasing a replacement for a broken rear bracket for my kitchen drawer. There are no markings on the bracket itself, but drawer slider has a UNIGRASS 6600 stamp. If you can see in the picture, the square protrusion on the rear of the bracket inserts into ... (cont.)

Rheiss mfg corp nyc R-26

Hi, I need a right side drawer slide rear bracket. It has a part number P-5850-23. The left side bracket is P-5850-25. I don't know the name of the manufacturer of the bracket or the slide. I hope you have something compatible! Many thanks, Lou

Grant 228 Cabinet glides? Looking for a replacement glides for two kitchen cabinet drawers the drawer track length is 23.5" and it attaches in the rear and at the edge of the cabinet. The house was built in 1980's and by the laminate it seems original. Any help much appreciated. Thanks Robert B. ... (cont.)

all we really need is the plastic part. Just glued it it for now. Could I please order 2. I do not know if they are the same for right and left. Need one for each side.

Hope this pix helps

No numbers, no names or markings, cabinets are 27 years old (Panabaker cabinets). Screwed onto back of cabinet. Plastic broken. Need replacements. Can you please help me find the right ones?

I need some plastic rollers with the plug to keep the roller on the shaft. The roller OD 1 inch ID 3/8 inch wide 3/8 inch The roller retainer OD 3/8 inch ID 8/32 inch wide 3/8 inch Can you help me with these parts for this desk. I can not find any model on the desk

I need a replacement hinge for my homecrest cabinets. Can you tell me if you have one like the one I have attached? Thank you

I am in need of some drawer stops for my dresser. The dresser never had them originally. There is a wood guide that is 1 1/4" wide and 14" long in every drawer. There is a 1/4" catch on the top and bottom of the drawer. Currently no metal or plastic. See attached pictures. Also, does Swisc ... (cont.)

How thick is the self closing door hinge that measures 2 and 3 quarters of inch