Viewing all customer Discussions for:

Other

My window crank is broken I order the parts before but it did not fit I will like to replace the crank. Thank you

I HAVE SIMONTON WINDOWS #9048288/06 PATNBR 544699 I NEED 4 TOP SASH GUIDE. I ORDERED IT BUT GOT THE WRONG SIZE. I WILL ADD A PHOTO OF THE PART. CAN YOU HELP ME.

i have 2 rollers that need to be replaced. they are off my patio door, and have a tandem wheels on each one that measure 1.5 inches each.

Can't find this handle anywhere

Not sure what these are called. They are made of plastic. They are about 1 1/2" long each way, and less than 1/4" thick. they hold the glass frame corners together and have a little nub that extends into the window frame and act as guides to slide the window and keep it in the track. ... (cont.)

hi i saw a picture of a possible fit for my window sash stop. i serched your inventory but i didnt find a match the stop is bottom - 1 3/8 x 1/4 top - 1 9/16 x 3/8 side - 1 1/4 wide 13/16 depth

No markings on parts.Wheel insert total length 4"Housing total length 6"

Do you have this roller? Note that some windows have plastic wheel, and some have metal

Part number is 8254. We will 3 right and 3 left. Let me know if you can positively identify the part! Thanks! Phil

Dear Experts team:Please help me find this part if you have in stock. thanks your time spending on this matter!Sincerely Kenny

I just bought this house with a broken sliding door lock broken.

I have Paradigm windows approx 5 yrs old. The pivot bar has two holes. The remaining piece is lost.

Could you tell me which balance replacement part number I need?

These are from 1988. Can't find a window manufacturer name.

Vinyl window screen frame has 4 plastic tabs that keep the screen in place. The thin part with the cutout has snapped off on all four tabs. There is a single digit on the tab, they are 1,2,14, and 15. I am trying to find a replacement or a solution (other than duct tape) to secure the screen. Th ... (cont.)

Do you have a part like the plastic part I uploaded Our house was built in mid to late 60's cabinets were built on site.I'm going to be ordering other items I already located but will wait to see if you have this Part toThanks for your helpGeorge

No name, no numbers Tbar end with stop Tapered nose Holes are 3/4 inch apart First hole is 1 inch and 3/16 from tend Stop is 7/16 from tend 2nd hole is 5/8 from tapered end

These are off a milgard casement window, circa 2005-2010. I need a new geared crank, and about 40 of those white plastic guides.

Hi - I've come to believe these are discontinued brackets and the alternative would require the removal of a metal bracket that is fastened to the back of the cabinet and a new/different type of bracket screwed into the back of the cabinet - the material is only 3/16" thick so a screw won't work. Is ... (cont.)

Trying to locate truth 45108 or 4.480.075 Crank gear for window. I will include picture. Also need the cover and crank arm