Viewing all customer Discussions for:

Other

Hi, I am looking for these I need about 52 of them

I am looking to replace a casement window crank for a window in my cabin. It was torn out by a bear. The window was made by Bergerson Windows in Oregon but they do not seem to be in business The name on the hardware is Anderberg and they seem to be out of business as well. I hope you can help me ... (cont.)

House was built in 1993. Has Viking windows. Part number 2690EE28 Can send more pictures if needed. Need replacement parts for two windows exactly the same size. Length of bar is 28 inches Thank you

Hello, I was wondering if you could help me with determining what replacement parts I would need for my window. Please see attached pictures. My understanding is that I need an 11" block and tackle part, but I wasn't sure if I needed an exact match when it came to the stamp code (1090). Could I g ... (cont.)

Simonton H-R35 single hung windows; all balances, shoes and latches require replacement in our home. (most still okay but will replace all anyway due to age) First photos are of the latches - third is intact balance and fourth is two balances/shoes on a paper plate after I removed them. Want to conf ... (cont.)

Hi - the crank (left handed screw) just unscrews when I turn the crank. It appears that a knurled cylinder part that is part of the initial screw mechanism has become disengaged; It seems that cylinder needs to be forced back in (to keep the screw mechanism in) but won't stay in possibly because whe ... (cont.)

Hello, I am looking for the bottom part for our closet doors. The roller part. We need a quantity of 10. Do you have those available? See attached picture. Dino

Can I please get a price and availability for the attached rollers.

We need to replace this latch as it's recently stopped working. Having difficulties finding someone to fix this, as we are renovating our family home for sale. I've seen no numbers to speak of but took this picture. I hope this helps. Thank you so much.Pamela

Hi, we have loewen windows, and one of the double-hungs has a small metal piece that is broken. It's about an inch long, bronze finished, and it seems that it helps hold up the upper sash. The piece goes in the outer track, on the right side, when viewed from the inside of the house. The windows ... (cont.)

Need replacement part, window operator sliding kit for 2 windows

I'm trying to replace this part. I purchase part number 39-278 And it doesn't work. The window locks about 1 inch from closing all the way. What is the correct part number that I should've purchased? Can I return the parts I already purchased? Do you also sell the round clips?

I measured it at 28" long I have 8 windows

We have many windows that are in need of new latches like this photo. Do you have this product? Thanks, Renee

Aluminum frame that holds the glass. Two pins that ride in the track at the top of the glass and the two spring loaded fingers that lock the window.

My sliding door lock is not locking easy way. I have pull my door very forcefully than only it's lock. Can any one help me?

Manufacturer unknown. Only markings on door edges were hand written numbers 11 (underlined) then 276. Sweep top is dome shaped 3/16" wide and 3/8" high from top of dome to bottom. I measured the channel which is the same 3/16" wide or maybe 7/32" max.

this is the clip that holds the screen to the top of the window frame

I am looking for a right hand, spring loaded slide in Tilt Latch. When I measure, the dimensions are 2 5/16th Length x 5/8th width. Do you have that size?

Hello I'm looking for this type of balance, and the pieces attached to the sash. Metal part Height is like 1 1/2 x 1/2