Viewing all customer Discussions for:

Other

Can't find any numbers on door or rollers need new rollers or parts to rebuild and track insert for replacement rollers

I'm looking for plastic guides about 3 in wide and 14 in tall. The guide is placed on the side of the window, and slides into the window jamb and is secured with small nails.

This is a Grass cabinet hinge. (850-01) Outside diameter is 1.28", or 32.7mm. Screw holes are 2" apart.

This is a part that came out of the jamb liner window slot. It is attached to a cord to help lift the window. I'm trying to find this part to fix the window. Any help would be appreciated. Thank You David

I have a window that the bottom roller comes out of the guide when you open the window then try to close. I also need window crank covers and handle for this window.

I'm unable to locate a part with a latch the same size as what I have. The door is approx 3 years old. I can't find any numbers on the handle or latch. Thanks.

The arms of this operator are labeled "Truth", but the manufacture of the windows remains unknown. The width of the internal part is 5 and 1/8. Difficult to accurately measure arm lengths with operator in place, but I've added a ruler to some of the photos for reference. Also noted six screws in ... (cont.)

Hello ~ I'm looking to get the Simonton Pro Finish Contractor series balance assembly. Do you sell them?

Knob shown has Brocken off. We need a replacement inside turning knob since the metal has cracked off and an exterior lock with new keys.

Hi, I already bought S380-27 with option 2640 (27 inch series 380 channel balance) while fixing that i found that the top sash also broken in my window and i want to replace that to. i have attached photos of the top sash from the window. please confirm the part number to order. Thanks, -Sathiya ... (cont.)

Stamped 2620F Metal is 27" long. Plastic shoe depth is 1-3/32" What is the correct replacement balancer? Thank you for your time.

WINDOW HAS A BROKEN PIVOT SHOE. THERE ARE NO CUT OUTS FOR SHOE REMOVAL. WINDOW IS 20-25 YEARS OLD. IT APPEARS PART 15-178 OR 15-188 MAY BE A FIT. FOR REMOVAL OF THE BROKEN SHOE DO YOU SUGGEST MAKING A CUT OUT OR USING JAMB SPREADER? WHILE USING YOUR JAMB SPREADER TOOL WOULD BE EASIER, I'M CONCER ... (cont.)

I purchased a patio door from Reliabilt which did not include a handle. I am looking for the correct handle with a key lock.

Hi I need two handles for patio door model SGD-C30-180- *97 Company is Aama/nwwda

Hi, I'm looking for 3 items for some older Kolbe casement windows (estimated installation is the 80's) that are structurally sound but need TLC. (1) See photo 1, looking for the weather stripping that fits in the kerf. Looks like it was bubble type (similar to 58-053?), but hard to tell because it ... (cont.)

I am in need of parts for an old installation of a ContractorsWardrobe bypass closet closure. Please see pictures of top and bottom guides/rollers. Seem to be similar to your PN's 23-028 and 23-079. I don't see the top guide bracket on your site. I would require 2 bottom rollers, one guide bracket, ... (cont.)

I need to replace my existing lockset but I compared the dimensions of the 40-049 to mine and the faceplate screw hole spacing is greater than on my Wright lockset. Can I return this 40-049 if it doesn't work in mt storm door?

Hello, The locking mechanism on both upstairs and downstairs patio doors need replaced. Was hoping you could help me match. - thanks Travis

Hi, I'm looking for a replacement section of exterior trim for my patio door. I've asked around all the big box stores and couldn't get any help, it's been over 5 years and still nothing, I'm hoping you all can help. The piece is the outer left side, it was warped and needs replacing. I have some pi ... (cont.)

Do u have or similer