Viewing all customer Discussions for:

39-092 ROTO Casement Operator

My window guy told me the window brand is a milgard. Any info/help will be greatly appreciated! I have a few cranks that need to be replaced. I tried local hardware store cranks/universal but no luck. Thank you! Looking forward to hearing from you. Best, Bill

Hi, I just bought a house and all three casement windows operator are broken. Can somebody tell me what is the right spare part ? Thank you, Calin

Looking for a replacement for this. Only the roto housing

The operator I have is a P4600, which I believe has been replaced by 39-091 and 39-092, please confirm. I am need to measure the hinge brackets to make sure that they are 10". Do these come in any other sizes? I am also in search of the linkage between the operator and the window as highlighted by t ... (cont.)

Good afternoon, We need help finding a similar part to this. I understand it's old and may be discontinued but I would like a similar item in functionality and looks. Thank you,

i have these milguard windows and am looking for replacment casement operator and gasket? do you have these?

I've got some casement and awning windows that have parts that need to be replaced. The windows were purchased from CertainTeed in 2004. CertainTeed is no longer in the window business so hoping you can help me determine the part numbers that would correspond to the mechanisms shown in the attache ... (cont.)

Hi, the casement window crank operator doesn't work and the hinge is broken. I can't find the manufacturer's name on the window. Also I can't replace the window because it was installed outside first and then put inside stucco later. I only found the information on the hinge is: INTERLOCK WORLD P ... (cont.)

Not the entire assembly, just the arm crank. It appears to be a 5/16 hex, but it is stripped. Almond/beige color

Window measure 34 inches (L) X 15 1/2 inches (W) no markings , except for "bonded 99" on outside window frame Window has a "locking device" on left side of window. appears that an "arm" of the device is missing or not working? Thanks for all of your help.

I am requesting your assistance in identifying the subject parts that I heed to replace to operate my windows to open and close. I would also like to purchase both the right and left side operators. Your assistance is greatly appreciated.RespectfullyRobin

We need 2 operators, plus 1 hinge for Milgard windows, the operators are 5" in length

I have a 4 panel bay window that I cant seem to find replacements for the window cranks.They go in from the inside of the room and screwed in place from the outside.Can you possibly help me to find 4 replacements.ThanksBill

HI, looking for 4 of these w/ handles RH. Screw holes about 4-3/4

The assembly that connects the window closer to the bottom of the window.

I am trying to figure out what parts I can buy to replace this hardware. I'll have to go back out to the property to take it apart to get more details. This hardware is on a rental unit, which I don't have any time access to. Any help or insight is appreciated.

Hi- I am getting ready to order your 5/16 spline window crank (Product Code 39-274) but wanted to make sure it will fit a hexagon shaped receiver. I have ordered cranks before but they didn't work because they come with a round end. See picture for shape. Thank you! Leslee

Looking to replace all of the hardware attached to this operator. It's a vinyl window but I don't know the manufacturer.

No identification found on vinyl casement window. May need up to 10 hinges. Was unable to remove hinge from to window at this time for better picture.

I believe this an Erie window? Not sure. I'm looking for a new roto operator. Thanks