Viewing all customer Discussions for:

39-097 Pella Window Crank

Hi, My order # (above) is in the process of returning. I ordered 39-175, 39-176 and upon opening the package I discovered the arm attached to the gear was too long.

I'm working on putting a doggy door into where we have a casement window and can't make a full rotation of the window crank because it hits the bottom of the plastic frame on the doggy door. I tried measuring the diameter of the shaft and ordered a 4" extension for 11/32". This turned out to be too ... (cont.)

Looking for replacement casement aperators and sash locking mechanism

Crank and handle with broken part in the crank. 1LH on the bottom.of the plastic cover of the handle

Will a 39-097 crank work on a Pella casement window that previously used a 39-175 operator?

I have windows 21 x 41 and need to replace the hardware to straight arm, right sides opening. Please help

HI Can you identify this part and price if available

I need a crank mechanism for what appears to be a pella window. Im guessing it is a 39-097 but dimensions where not found on the Swisco page that I could find. Maybe there are no other arm lengths for a pella window. Can you confirm that. see dimensions on the picture. First arm is 4 1/2" second arm ... (cont.)

I cannot find any numbers the old cranks say Caradco

It looks like I need a part similar to The 39 - 097. The broken hardware has a window attachment section that is as long as the arm and this differs from what I see online. I believe these are Pella Windows circa 1985. Can you confirm this is what I'm looking for?

arm came out of cranking mechanism tried to pry up wood but not successful.

I have a few windows that are 30 years old and mechanism doesn't work well. How would I know which one to buy. The number on the window is B25888Y26B-2 if that would help at all. Thanks Ron

My window is a Pella Casement- C1c 2.8 150513 ................................C1G-2 HS4-98 These numbers were on the glass. I could not find anything on the actual wood frame of the casement window itself. I need (2) replacement Caesment Sill Stops. It is a Wood Opera

Very old window operator

Can you identify this part and do you carry it?

Need part info for casement crank assembly (for a casement hinged right looking from the outside). It's silver in colour and attaches to the sash with 3 screws.

Looking to swap out old cranks on Pella series windows. Looking for something compatible with the photos below.

This is a Pella double window. House was built in 1993. Both cranks left and right need to be replace. Can you please tell me what part numbers, cost, and how long the lead time to get them? Thank You!

This window hinge broke off the internal mechanism that is located inside the window frame. Can this part be replaced or do I have to get a whole new window ? Or can I remove the window frame for access to the main part that controls the handle that opens and closes the window?

Please me find my part #. I need a left hand.