Viewing all customer Discussions for:

39-097 Pella Window Crank

I am seeking replacement hardware for 4 Pella casement windows - IGCC CBA 3-97, IGMAC CIG-2. I hope to get all new cranks, locks, arms, etc.

Hello, we just recently bought a house that has 10 or more windows that I need to replace the cranks for. I'm trying to figure out how I know the size. I've enclosed a picture and I could certainly get more if needed. I don't see a brand on any of the windows as it's an older house and they've bee ... (cont.)

The housing for the gear mechanism where the handle meets the linkage is cracked so the window won't close the final Inch. Can you help me identify the part I need? Thanks!

This is from an old 1990s era casement window. The holes are about 3.75" apart.

Need the Pella operator to crank this window shut. House was broken into before I purchased. Operator is gone.

My home was built around 1990 and the Pella windows have never been replaced

These window were installed in New Mexico in 1997 and the slider rail is failing on many of them. Thanks

Can you help me identify which is the correct part? Thanks, Ted

Three of the teeth on the gear are broken or missing

Do you need any more info?

Wind tore open window. One arm as shown pin is torn out. I found the screw/pin. Not sure what/how to repair long term. Crank cover symbol is L36

I have a window with the crank arm broken loose from the crank. It looks complicated to change out, but first can i purchase the parts needed? Steve

I have a contractor repairing several of my windows. He's an Anderson installer so he's not familiar with Pella Parts. My windows use the 39-097 and 39-096 Pella Window Crank Operator. He's been installing those and repairing the windows. He said that I need a window lock mechanism and tandem lock, ... (cont.)

Arm that operates window has a broken screw head.

I'm looking for this specific part

I need help to find this operator crank

Hi, My order # (above) is in the process of returning. I ordered 39-175, 39-176 and upon opening the package I discovered the arm attached to the gear was too long.

I'm working on putting a doggy door into where we have a casement window and can't make a full rotation of the window crank because it hits the bottom of the plastic frame on the doggy door. I tried measuring the diameter of the shaft and ordered a 4" extension for 11/32". This turned out to be too ... (cont.)

Looking for replacement casement aperators and sash locking mechanism

Crank and handle with broken part in the crank. 1LH on the bottom.of the plastic cover of the handle