Viewing all customer Discussions for:

39-155 Caradco Window Crank, 9-1/2"

This is a 20" by 20" window installed in 1996. The crank mechanism is what I need to replace. Lock is okay...handle is okay.

I'm looking for the piece at the top of the picture. I don't know the name but it connects to the crank handle. The part that connects to the handle is 3/8" and the manufacturer of the operator is Truth. The part I'm looking to replace has a small chip at the end. I can open the window no prob ... (cont.)

Hello I have a client with windows that are in good shape but the locking mechanisms no longer latch. Can you help us identify the correct hardware information based on the attached photos so that I can order it from you?

The bottom boards get rotted after many years of service. The good one is the left window looking from inside. The one I need is the right side. Can I buy the bottom board or the entire window, just the removable part. Old hardware is still ok, rusty, but it works. A friend made the one on the left ... (cont.)

I need the hardware for right side window. Crank housing damage

Not able to find any numbers that identify operator. Have Caradco windows. Can research to see if able to ID from old paperwork. Handle has 45054 stamped in metal.

No brand markings noted

Crank just turns and nothing happens? Help!

Please advise if you have these exact systems for replacement. Long arm is 9 1/2 ". Crank base is 4" wide and 1.5 " deep. Need it for left opening window as well as right opening window. ( Pict.# 2916, 2917 ). Part # 20810 The 3rd window are pict. #2918, 2919, 2920. (9 1/2" long arm. Base5") ... (cont.)

Need replacement hardware for sw casement entry gard Sarah

45273 crank mechanism, L31539 short curved arm about 3 1/4 inches, 20748 connecting arm about 3 inches, bar on sash is 11 3/8 inches, stainless guide is about 10 inches.Main arm is about 9 1/2 inches long.

i need help identifying this window crank. this is the right window and the left is one is missing. previous tenants broke it and tossed it

For the duel replacement cranks is there a right and a left ?

Brand name of the window is Marvin, window are casements, windows are 30 years old.Brianwindows crank assembly is broken , windows do not openMarvin windows will not help us on this, i have contacted my rep.

Good morning,I would like to replace the current cranks shown in pictures with new cranks. The current brand is Loewen and were electric windows. We are going away from the electric windows and going back to hand cranking them. The only problem is that these windows are 12 feet off the ground so I n ... (cont.)

Windows open just fine. Won't close and handle attachment unscrews.

The number stamped on the operator is #R30842 and L30841. i need 2 lefts and 1 right. Thanks Doug

I'm trying to locate a Marvin handle that attaches to a Truth operator with code 20810a as in the picture. Could you please help ? Thanks.

On the final arm (silver in color) is stamped 20544. On the underside of the bent or angled arm that connects with the final arm is stamped 30636. On the long brass-colored arm that goes to the bottom of the window is stamped 30470LH. On the brass-colored half circle canopy that is at the base of th ... (cont.)

Good Morning, Can you please let us know which parts we need to order from your site? We are replacing all the parts seen in the pictures included. Thank you!