Viewing all customer Discussions for:

39-187 Sash Dyad Crank, 5"

window is about 20 years old and markings cannot be read. Can you help identify this replacement part? I will need both a left and right crank.

The only number found was 40942-A. Found on track attached to window sill. No brand of window found. Looks like good window double pane glass. Need 5 2 double Windows 1 single window

Swisco...I have a need to replace a few of these sealing gaskets on my casement windows. I believe these are Patriot Windows. Many thanks, Paul.

Need the window controller. Made by Truth part# 30866

can you Help Identifying a Replacement cranck installed on vinyl casement window Thank you

Hello! I am looking for the replacement parts for window locks and crank handles as pictured. Would you be able to help identify them and/or have them available for purchase? Also, in the alternative, is it possible to replace window crank handles like these with the new fold-in type handles? ... (cont.)

Need replacement window operators for both sides of casement window

I have a window without any operator. On the remaining hardware, it is printed "Ashland 7D698P".

I'm looking for a Truth casement window crank the numbers on it are 30614 and 30893 On Truths web site they have stock number HW38 Dyad .r7 This crank has a stability tab.

The screws holding the housing to the window frame have rusted off and are rusted into the housing. I am unable to remove them without striping the housing threads. I need the entire crank with housing, crank and gears.

Please help identify this part and your replacement part number. The arm is 5" long. As you can see, the gear is stripped. I would also Nike to replace the gasket and screws. Thanks!

Is the arm closest to the crank for item number 39-187, 1 inch shorter than the one on item number 39-089? Thank you.

Please examine my photos. First I ordered the Swisco 39-089, But it didn't fit. I order another piece 39-187 with the recommendation you give me but it still not work it still too big i send it back with the old one the one i need! I need someone to help me get it back with the new one i n ... (cont.)

recently purchased a 39-089 to replace the older one pictured next to it. control arm is the correct 5" but the crank arm on the old one is slightly different shape and 1" longer. Also picture 2 shows where there used to be a 3rd mountinf screw in a plate that was 90 degrees to the body entered on t ... (cont.)

Windws by Truth. Ladt pic is left side. Crank on right is also pictured and is 5 1/2". Need help selecting hardware on both sides. Window size is 48 1/2 x 45 3/4. My name is Michele

i was wondering if you could help me identify this part. It's very hard to see, but it is made by Truth and has an arm length of 5". It does not have a stabilizing tab.

We found that product code: 39-089 is similar to what we have. However, the the arm length is only about 4-1/2" instead of 5". Thank you.

I have a casement window with 5" mounting holes, like on the 39-187. However, the straight arm on my old one is 4.5", but your straight arm is 5" long. Do you have that part? Do you have it in the color clay?

Hi, I am looking for the windows operator to replace my bad ones. Please help me to find the right one in your website. I attach the pictures. Thank you very much!

What size handle fits this bore? I tried 3/8 handles and too big.... It must be either 11/32 or 7/32 right?