Viewing all customer Discussions for:

39-194 RH Window Crank Operator, 3/8" Hole

I have attached 3 window crank pictures and a hand written picture of the logo and numbers printed inside the handle casing. The part number appears to be 11500-3 2 RH. Paten number appears to be D-198, 202 U 8. RD 1963 CAN. I need at least one replacement casing and hand crank, preferably 2 ... (cont.)

Looking to replace right hand operator. Unknown manufacturer. Year 1966 in engraved inside. Thank you.

The hole in the link is 3/8 in. The number 72 is stamped into the link. The number 91 is stamped into the rivet that holds the link. The inside bottom of the case is stamped with the number 31.

I am looking for a new window crank. Inside my existing crank the model number read 1RH 18-0821. What would you recommend as a replacement?

I ordered the 39-025 but I'm unable to remove the quarter inch size sticking out of the arm. Please see picture.

Can you please identify the specific crank assembly and window lock needed for this window ?

Need to replace this with screws . It originally had a rivet that my husband had to pop out to take it off.

Hi, I am looking to replace a couple awning window cranks (bronze) and need a couple metal plates and plastic parts for inside the mechanism. I have pics attached and looking for help in matching up Thank you Rhonda

39-194 matches except link arm length which is 2.75. Will this work or is there another part no?

It is similar to 39 - 194 left-handed crank I made a mistake that the wrong number please contact me

I'm trying to find these operators. The top to bottom screw holes are 5-1/4" apart, center to center. The bottom screw holes are 1-3/8" apart, C to C, and the outer arm is flat, and 2-7/16" long.

Hi, I have this Jaloesi lock that has to be replaced. The measurements between all the outside screw holes is the same as 39-194, but the top has two holes instead of one. Also, the arm inside the unit is a little bit longer, about 2 1/2 " Do you have anything like this?

Handle has following identifying numbers/letters: C-11 500-11 Crank Assembly has following identifying numbers/letters: Pat. No. 198 202 US 12. H.R. RD. 1963 CA I believe the manufacturer is Weathertight. The home was built in 1996.

Do you carry these replacement window handles? I will need three

Looking for replacement window cranks for Aluminum Louvered Windows. I found a number on the inside of the window crank: 4714-B R. Please let me know if you have the replacement part. Thanks, Mike Y

Old style love Windows.

installed new awning operator. now has a grinding sound when closing window. applied lithium grease to gears inside unit. cannot to resolve problem.

HELP PLEASE. I have an older (house built in 1987) front window opening (100"W x 74"H), consisting of 3 sets of awning windows, using long linkage that opens (4) 13 1/2" x 33 1/2" glass panels, and using a RH Awning Window Operator, which I need to replace on one set of windows. I have attac ... (cont.)

Our home was built in 1958 (I think) and has the original awning Windows. Three of our crank mechanisms need to be replaced and I am not sure what to order. I have attached 3 photos. There is an ID inside the housing that says 1 RH. Can you help? Thanks so much! Alison

Hello - I just wanted to double-check before I place an order. The distance between the two bottom holes is 1 3/8" and the distance between the top hole and the bottom hole is 5 1/4". The arm that connects with a clip to the window has a little bend to it. I'm thinking that your part 39-194 RH is ... (cont.)