Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

My casement window is a Andersen Silver Line. The shaft hole on the broken handle measures 11/32" with my tape measure. As far as you know, would your product fit my window?

This is off a weather shield window left hand swing. I got the part number 972004 out of weather shields online catalog.

The handle shown is a stopgap measure. The original broke. We need three comparable folding handlesOriginal installation by Willmar in 1998.

My painter lost my crank handles for my kitchen woindows. see attached picture. The brand name seems is KK.. which model should I choose? Thanks

Names: Entry Gard Truth Number: L30841; 30470 L.H.; 3083

I am looking to replace these handles. These were standard old style folding cranks and I replaced with these T handles, which constantly strip. I like your Truth Folding handle and cover kits but do not know if they will work? Also the base of the hardware seems to be " permanently " installed so ... (cont.)

I have caradaco windows, one of the cranks wouldn't shut the window.. I noticed that it looked stripped.. I believe the operator shaft is all I need to replace. I can not locate any part numbers but hopefully the pictures I took will help you identify the type.. Thank you Stephanie ... (cont.)

Hi, Looking for replacements for my Truth operators. Part B is 4" from the center of the hole that connects to the window pin to the center of the hinge, and (presumably) part A is approximately 5" from the center of the hinge to the center of the crank gear. The number "45251" is stamped on the ... (cont.)

Kindly help. One tooth is stripped. I am unable to find the model or its suitable replacement. Can anybody help me with this.

Casement windowsI am trying to find these handles to open the windows they are American Cressman's they were bought somewhere around 2001 2002 from Home Depot in Selden New York

This is a Biltbest opener part number 233 D. C. Is There a replacement part for this.ThanksLaird

Looking to replace entrygard Truth crank window hardware. There is a number on the small arm to bottom of window -20910. Length of bottom frame plate is 9 3/4? and handle plate is 5?.

Home was vandalized and we need three crank and arm assemblies. Where can we find the parts to repair and replace? Desperate in Texas! Regards,Doug

Looking for parts

Hello Can you help me? Due to recent vandalism I have three broken Silver Line windows with broken cranks, and arm assemblies. Based on photos above can you help? Regards Doug

I am in need of a left and right EntryGard Eagle window crank. The number on my crank is 40754 Please let me know if these parts are available.

turning handle broke off completely from window mechanism

Window is a eagle I have number if needed. I need 2 ea each right hand operators. Thanks Jerry

I can crank my window open, but I can't close it without someone standing outside and pushing the window closed. The pictures show the crank and the arm that is supposed to open and close the window. The platform that the crank sits on is about 4 inches wide and the arm is about 4 inches long when i ... (cont.)

May need a few of these. Older Windows on a Church.