Viewing all customer Discussions for:

39-216 Single Arm Window Crank

Seeking direct (or equivalent) replacement for this window operator from 1993. (see photo)These are not broken, but the original design has always had excessive free play within the gear train, allowing the windows considerable movement. The end of the (~ten inch) arm can move by almost 2" just du ... (cont.)

The crank screw on my Pozzi window came out. I can open the window but when I close it, the screw comes out. Can I tighten it somehow, or do I need a new crank? The windows are 16 years old. Thank you Chris

Stamped on the assembly is "Truth" / Pat no. 4,840,075/ Made in USA. Also on one cogwheel is the number 3136 although I am not sure of the last digit. The house was built in 1996. Thank you for your help

I have Crestline Casement windows and need 2 right hand and 2 left hand operators. - They are all of the single arm variety. - The total single arm length is about 9 inches. - The body (where the gears are located) is about 5 inches long. - The operator looks identical to your 39-216 and 39-217. ... (cont.)

I have two kitchen casement window crank arm and operators I need to replace. One on the left and one on the right as I suspect that since the right is broken the left will be soon to follow. I believe this is truth hardware by the Windsor wood window brand.I'm very handy. I live in Bethesda, MD ... (cont.)

I am looking for a SEMCO casement window operator with the number 31538, it has a "Rivet to Rivet" length of 8 1/4" for a 17" wide window.

I have a Jeld Wen casement window that has an inoperable crank. The crank freely spins . The gears do not connect. The crank mechanism has a stamp reading Pat # 48040.075. That is the only ID information I can find when I removed the sash. Would someone please call me Thank you, Daryl ... (cont.)

Please let me know if you carry this Marvin part, as per the picture, is about 4 1/2" from the tip to the line across and then is about 2" to the end of the moving part.

My small window operator unfortunately has broken. It's small with only one arm attached to the railing

I have a broken LEFT Single Arm Roto-gear Operator for Marvin Window Frech Casement window. See photo. Marvin no longer makes the part but tells me it is Marvin LH part no is 10814810. Do you have such a part? regards, B. Bates

It is stamped as Truth 45275. The arm is stamped with 40267. Total arm length about 9.5" 4.5" from the end to the bend in the arm. Thank you!

Need casement operator and related parts, white handle/cover, guides. Pat. No 4,840,075. Made in USA

Looking for replacement of above subject

I've read other posts that when the worm gear comes out you can't replace it. That's what happened. so I would have to install a new operator. Is there one available that would work on this old window? The arm that extends out is approximately 10" long. Let me know if a better photo is needed. ... (cont.)

Do you have a replacement for this handle?

Hello, Something has broken within the case operator, and the pinion will now only open the window, not retract it. From what I've read on other posts, replacing just the pinion is not a solution. Therefore I'd like to find a suitable replacement case operator. My only other challenge is that it app ... (cont.)

This is the top bracket for a casement that cranks open from left to right. I used part 39-216 to replace the bottom bracket once on this window.

I need to replace this whole mechanism, Truth with a 9" crank armThanksChris

Window crank comes out. But doesn't close the window.

Truth 45106 3 2Z