Viewing all customer Discussions for:

39-264 Andersen Split Arm Crank

Hi, I've gathered that this part is discontinued and that there is an adapter that matches the hole pattern, but I can't find a crank with the same arm configuration. Thanks, Matt

I need a replacementc crank assembly for a 36"x36" Andersen window. Have numbers on the assembly but not sure if they are helpful.

I'm looking with for an Anderson split arm crank with the numbers C-9400-1B on the front and F-9400-BA B on the back. The outer mounting screw holes are 4.5" and the bracket ends they go through are squared.

Generic window, needs knob as it seems to be striped. The window has a straight arm, and the roll out has a bent arm.

I need to replace the spit arm operator in my Anderson casement window: it is has 0-9400A-1 stamped on the front, and F-9400-8A stamped on the underside. The window opens from right to left. Thanks in advance.

Need crank mechanism and handle for one Anderson window, which is part of a bay window and is on the left hand side of the bay window as you look out from inside the house. I took two pictures of the unit need and one picture of the right hand side to show the brackets connection to the window itse ... (cont.)

Hi, I have a broken window crank with the top of the part saying C-9400-1B and the bottom of the part F-9400-8A. I can't find matching replacement anywhere. Measurements: Distance between the outermost screws: 4 1/2 in Distance between the innermost screws: ~2 3/4 in Outer arm link length: ... (cont.)

I'm in need of three of these type of window cranks. all three have striped and will not open. facing the window, all three of the windows open on the left. Thank you, Jim

Replacement operator needed

please help me identify this part and let me know how to replace it. Thank you

When I cranked the window shut, the plastic cover cracked. Upon further inspection, the crank worm no longer remains in the housing but keeps pressing against the cover upon closure. Can this be fixed or does the unit need to be replaced. Thank You

Hi - an Anderson casement window in my house won't crank open/close anymore. I removed the casement operator and have uploaded pictures I took of the part; please advise as to the correct replacement part - thanks. -Jeff

Hello, I am wondering if you can help me, I'm looking for replacement hardware. Please see attached photos. Is this something that you stock? If so, how much does it cost and what is the lead time. Please do not hesitate to contact me with any questions. Best regards, Lee

Hi guys, can you help me with this one: Numbers listed on the arm are CW-35 CW6 20" SPLIT Picture attached.

A few questions: 1) Andersen sells both the corrosion resistant and a non-corrosion resistant one. Is your part 39-264 the corrosion resistant part? 2) Some of mine are very hard to crank out. Does that mean they need to be replaced or can they be greased.

The part # on this arm is C-9400-1 viewed from the top. Flipping it over, it is stamped F-9400-8 on the bottom plate.

Please help.

Hello, I am looking to replace the crank mechanism on my Andersen window. The part # on the front is "C-9400-1B" and on the rear is "F-9400-8A". Do you sell a compatible replacement for this? Thank you Joseph

I have a bay window with a window that opens on each side of bay window. I need replacement of both. The main part has c-9400-1 on it. The Arm has f-9400-16 on it.. Are these universal and how do I order them? Thanks Kort

Need a handful of operators. Can you help? The windows are Andersen or at least the cranks are