Viewing all customer Discussions for:

39-267 Andersen Classic Handle

Hello, the handle in the photo is from an old Andersen window and it is stripped and will not seat into the crank operator. Do you have a replacement? At this point I am looking for any handle that can work and not concerned with obtaining an exact match.

I'm looking for these in white. What I bought from you wont work.

My order number was 1759286,these were parts of Andersen - straight arm operator and Tandem stash Lock. These parts did not fit and I returned it back. I have uploaded the pictures of the parts that is currently on my Window and looking for the correct replacement parts. Please let me know the corr ... (cont.)

Window glass is stamped with Anderson. No markings on operator parts Arm seems to be 8 3/8 or so Looks different from typical Anderson straight arm operator replacements from what I can tell. The cover for the crank handle is only 3 3/4" to 4" wide. House was built in 1967 not sure if this was a rep ... (cont.)

Wanting to order folding cranks and covers. What do you recommend?

Looking for a replacement for window crank operator, Anderson window, installed 1999. On part has nubmer F 9400 8a

This is an Andersen casement window crank; the underside has the number 7191 and also a 3. I think it has 12 teeth. The condo was built around 1978. Thank you for any help you can provide in replacing this part.

I need 2 casement handles and covers. The spline "?" appears to be 11/32. The measurements of the screws, center to center, approx. 4". Will these fit? I include photos. Thanks for any help.

13 inch arm, number stamped on arm top row = 1 361 485r. Second row= 1 361 482 hcr I need a left and a right. I ground off the rivets and opened the mechanism. Found teeth ground off bevel gear that handle attachesboth left and right window. The vise grips in the picture are holding it together ... (cont.)

I found the following on the arm "C2-C45- CW2-CW3"

Need a replacement crank this one no long cranks window out

I have a couple anderson windows that need new roto operators that I am unable to locate anywhere. The arms are 14" long. The windows are actually KML archtop casements that were sold by Andersen.

I am looking for replacement pin that connect crank knob to crank arm

Anderson window crank and case

number on window glass is CIG-1 2007 Number on the part is 135143

I need to replace my Anderson window crank mechanism. Please see attached. Which product would it be on your site?

Need 8 awning window crank handles as in photos.

Ordered window cranks 39-114L : Crank Handle, 11/32", in early summer. Just found out from my tenant that they are too small a diameter for some of the windows. Is there a larger size?

Pictures attached. I need the replacement part for the crank shaft. I assume I have to replace the entire unit, so here are some pictures to help identify. I need it in oil rubbed bronze.

Original Part Numbers: 1) 1361486 L/1361483 HCR 2) 1361485 R/1361482 HCR (Picture Provided)