Viewing all customer Discussions for:

39-267 Andersen Classic Handle

The photo shows my existing operator has three screws aligned with the geared pivot point plus two more screws on a smaller centerline toward the external side of the window. All replacement operators I see have a different mounting screw arrangement with two unaligned mounting screws with smaller ... (cont.)

ANDERSON HANDLE CRANK WINDOW

im looking 13 handles for anderson windows

Ordered part #39-267 for my house windows, but I need the shaft compartment which the handles I ordered attach to. Can you please help me identify which part I need that will work with the parts I already ordered? Again, I'm looking for the shaft compartment which holds the handle and has the swing ... (cont.)

OPERATOR HANDEL

This Anderson crank handle looks gray. The inside is plastic and worn one side.Not including knobs is 3 1/2 " extension. I included the numbers on the back. Is it still available? House built 1999. Thank you.

Attached are pictures of our Andersen Awning window specifically the arm operator open and closed, the cover (which appears to be a different style and size on your website) and our specific cover. We are attempting to verify that the parts below are correct. We believe we need to order 39-099; ... (cont.)

Can you please tell which options i have to replace these in white? Many thanks, Mary Ann

I need the cover and handles of the hardware as it appears on that picture

Hello, the handle in the photo is from an old Andersen window and it is stripped and will not seat into the crank operator. Do you have a replacement? At this point I am looking for any handle that can work and not concerned with obtaining an exact match.

I'm looking for these in white. What I bought from you wont work.

My order number was 1759286,these were parts of Andersen - straight arm operator and Tandem stash Lock. These parts did not fit and I returned it back. I have uploaded the pictures of the parts that is currently on my Window and looking for the correct replacement parts. Please let me know the corr ... (cont.)

Window glass is stamped with Anderson. No markings on operator parts Arm seems to be 8 3/8 or so Looks different from typical Anderson straight arm operator replacements from what I can tell. The cover for the crank handle is only 3 3/4" to 4" wide. House was built in 1967 not sure if this was a rep ... (cont.)

Wanting to order folding cranks and covers. What do you recommend?

Looking for a replacement for window crank operator, Anderson window, installed 1999. On part has nubmer F 9400 8a

This is an Andersen casement window crank; the underside has the number 7191 and also a 3. I think it has 12 teeth. The condo was built around 1978. Thank you for any help you can provide in replacing this part.

I need 2 casement handles and covers. The spline "?" appears to be 11/32. The measurements of the screws, center to center, approx. 4". Will these fit? I include photos. Thanks for any help.

13 inch arm, number stamped on arm top row = 1 361 485r. Second row= 1 361 482 hcr I need a left and a right. I ground off the rivets and opened the mechanism. Found teeth ground off bevel gear that handle attachesboth left and right window. The vise grips in the picture are holding it together ... (cont.)

I found the following on the arm "C2-C45- CW2-CW3"

Need a replacement crank this one no long cranks window out