Viewing all customer Discussions for:

39-278 RH Awning Operator, Nu-Aire

I need a Left-Hand crank with a 3 7/8 arm and 1/2" screw.

Need replacements for old window cranks. House is old and nothing is standard. Can't identify manufacturer, although Swisco seems to be very close, if not it exactly. Crank base has the following part no engraved inside: PT NO 10-9231-LH-4.

Need to replace 2

Early 60s Quincy-Armaclad enclosed porch Top to bottom hole C/L 4.687 Bottom C/L .750 1/4-20 Tapped hole at lever end Tooth on crank worm seems to be broken. Window will not close Replacement or Equivalent needed

I need to find a replacement part for this jalousie window operator. It doesn't seem to match any of the ones listed in your jalousie window parts and it looks more like the one you have for awnings. The windows were put in 1993. I live on Sanibel Island, Florida. Please let me know if you can help ... (cont.)

Crank just spins and doesn't move window. I am unable to remove the bolt that attaches the lever that I am supposed to b able to remove. Any ideas? This house was built in 1979. Thank u for your time.

Order # 1175997 I cannot connect extendor arm to window . Did I order the correct replacement ? 39-278 Thank You

1500-11 is inscribed inside the handle . I was told by someone that would be the 39 Dash 278 which I ordered but when I got it the holes did not match up and it was the wrong color. It needs to be bronze and with the holes like the example . What do you have to match what I need? Thank you Duane ... (cont.)

We need to replace 7 of the Awning operators. We think the awning operator is the same as your Nu-aire RH awning operator 39-278 (based on the patent numbers found on the old operator (see attachment photos). Question:1. Do you have the dimensions of the 39-278 so that I can compare?2. The end of th ... (cont.)

Our 4 pane awning windows are vintage 50 or 60?s. They were given to us and they have no brand on them , we need a right hand operator but can not find one, it measures top center to bottom center 4 3/4 and bottom center to center is 3/4, maybe you can help locate and identify this part, thank y ... (cont.)

I am looking for a new window crank. Inside my existing crank the model number read 1RH 18-0821. What would you recommend as a replacement?

To whom it may concern, I'm looking for the Right Handed Window Operator. I had bought the one in the pictures from Home Depot a couple of years ago but cannot find it now. The measurement between the two bottom screw holes is 1". The measurement between the hinge rivet and 3/8" hole is 2 5/8". ... (cont.)

good day, my operator is similar to this one below. the good one is still riveted on the drag link. my dimension across the bottom two holes is 1-5/16 cl-cl, and top to bottom on the mounts is 5-1/4 the drag link is 2-7/16 cl-cl. pictures attached. is this the correct part? thank Rick. Right- ... (cont.)

I need a replacement window opener. PAT.NO. 198202 U.S., R.H.RD.1963 CAN overall length is 5 4/5 inches top to bottom hole is 4.5 inches on center off set crank attachment holes are 2 3/5 inches on center I ordered 39-278 and its not close enough - can it be returned? Thanks Kurt ... (cont.)

I need a right handed awning window operator. Can you help me locate it? Thanks

Hello,The mechanism has become stripped, and the windows won't close or close with great difficulty. according to this page: your Product: 39-278 will replace our old cranks. I just want to be sure about the 3/8 inch hole. Please see my picture I've attached to this email. Do the two products ... (cont.)

Hope you can identify the part.. i need 3