Viewing all customer Discussions for:

39-516 Clip-Stud Bracket, Left Handed

I am looking for Truth crank mechanisms to replace the nonworking ones. Can you help please.Thank you.Benjamin

There are no markings but the part is on the bottom of the window pane as shown in pictures. The windows were Marvin windows probably manufactured early 80s. Marvin.com said they discontinued that part and advised me to check with you guys.

I had a local lumber shop repair 2 windows. They lost some of the hardware I took in and said some of the other parts were unusable so basically I need everything to connect these 2 windows to their sashes. Some of the numbers I can make out on the similar but reverse orientation window are 20755 an ... (cont.)

Looking for Windsor Egress hinge arm operators, their part numbers 540019 and 540020, one pair both right and left. Also need one of the posts that screws onto the bottom of the window that the short arm of the operator slips over and clips onto. Need the one for the left window looking out, or the ... (cont.)

Lincoln Window. Gut of crank seems to be stripped. Cannot close window must manually push shut to close and lock window. Extended double arms measure approximately 17 inches. (my best measurement) Thank you for your assessment!Alice

See attached photos Need the hinges and brackets shown for Left and Right casements. Stainless preferred.

The bottom hardware that connects to the window is rusting and has failed. The operator is a entry guard that is still in good working order. It looks like the 2-bar hinge set 10" (36-048) will work on the unit but I need to find the parts for what is connected to the window itself. Please see attac ... (cont.)

Hello! I have a bunch of rusty crank operators I am hoping to replace on Pozzi windows. Please see photos attached. May I have some guidance on the correct part numbers? Thank you! -Allison. P.s., I have ordered parts from you before and been super pleased! You really solve a problem for those ... (cont.)

I have a window just like this one that has fallen off the mechanism at the bottom and bent the attachment to the crank. The cranking mechanism appears ok but the hardware that actually attaches to the window is pretty much trashed - any ideas on replacements parts for this ?

Please have these parts....Im looking for bottom hinge,sash bracket,and Casement track

We are looking fir a right crank and a left crank unit

Hello, I have this caradco window crank. Need all the pieces to replace the entire left hand crank. The picture here is for right hand. I am ordering the following and wanted to make sure I have included all the pieces. 39-156 39-516 39-505 36-049 Am I missing anything? DO you sell this crank as a ... (cont.)

The brackets rusted off. I can see truth on the part with the gears. I'm looking to replace the entire bracket, operator, bracket too. Part number 50.60.14.011. Looked close but not sure. This is opening a one foot by three foot bay window. Need both right and left sides. Help!

need the part that attaches to the window and connects to the crank arm for a Semco window. This is for the left window as you look out from the interior of the house or the right window if you are looking from the exterior of the house. Thank you

Do you carry this Truth Window Hardware? Truth Entry Guard Main bracket has 40471 stamped on it One of the main linkage has 30842R stamped on it

At the bottom of the window (which appears to be controlled by 39-031 and/or 39-032 (I have two left windows and two right windows) there is a metal track and a guide that allows the bottom of the window to slide toward center as it opens. The guide and the track are both compromised on that one wi ... (cont.)

Hi. We installed 4 casement windows in our house LA 20 years and the crank hardware is going to pieces and needs to be replaced. Your video for replacing them is as clear as can be but beyond my abilities as an unskilled homeowner. I'll need to find somebody to do the work, but hopefully you can hel ... (cont.)

I have one right handed casement window and one left handed. The crank on the left works but the operator keeps getting stuck at the hinge and stud bracket on the left. The one on the right the crank only opens the window, when I try and close it the gears won't catch. The window are over 25 years ... (cont.)

Please help

Can you help me identify the replacement operator I need for this window? Thank you in advance.