Viewing all customer Discussions for:

39-517 Clip-Stud Bracket, Right Handed

Main arm about 9". Track on window about 11 1/4". can you identify now or do i need the hardware off picture

Truth Entry Gard Window operator Hinge on right I need two

Do you have pairs of hinge arms that have a sash clip on end that attaches to the track? My windows are Biltbest Casements 1987. The sash tracks are built into the windows and go all along the width of the window.

Hi I would like to know what operator to order to replace this one. It is a truth entry gard with a part # 30744. I can find the truth dual arm that seems to match but this one seems to have a third arm underneath the top ones. Can I replace it with the regular dual arm? The two arms are 9.5 an ... (cont.)

Window guide comes out of rail. Entry Gard Truth upper linkage 20810 lower link 6809

Good afternoon. I talked with Marvin window company to help ID parts and they gave me two parts that they no longer manufacture. I am looking for one Marvin Dual Arm Roto-Gear Operator (Ultimate wood casemaster disc LA Pre 2010) and one Sash Track (Ultimate wood casemaster disc LA Pre 2010). The win ... (cont.)

This a Truth part that we need to replace. The one to replace is the right hand window - picture of intact one is the left hand window. Please advise if replenishment is available.

the handle is loose, can't open and close

This part is on a 50-year-old Pella window. It will roll one way but will not let me roll it back.

I need this crank assembly. 4.5" arm. 6" arm. 8.5" arm.

Looking for replacement hardware for two (left opening and right opening) Norco window crank openers. Not sure how old these windows are. The hardware is marked "Truth Entrygard". Not sure these match your part # 39-031 and 39-032 as the shorter arm, stamped 20755, measures 3 7/8" and said part actu ... (cont.)

before I start replacing the hinges with products from your company, I was hopeful you would guide me on how to adjust the crestline casement window. As you can see from the photo the bottom part of the window is not flush with the casement- I have included photos of the gap, hinges etc. I have a nu ... (cont.)

The pictures are of the right side. I need the left if looking at it from outside. It is way broken. Crank broke too. Don't think I can open it.Numbers on it DEPRES-???DETA ??Also says entry gard Truth29810

Good Morning, I need a replacement part for a Marvin window that is 30 years old. I have attached 2 pictures of the window hardware as well as a sheet showing measurements and part markings. The current part fits in an opening 5 inches wide. It has numbers 89 and 43 on it. Other Truth parts have n ... (cont.)

These are Kolbe & Kolbe windows manufactured in 1999. They are 22" x 46"

These were Peachtree windows that were put in about 35 years ago. As you can see from the photos it opens out to the left. The number on the mechanism is 2081. And the wrds on the mechanism are Entry Gard TRUTH

Hello. We have 2 clad case master Marvin windows. The cranks (part number 10898240 ) no longer work. They are discontinued. There may also be a problem with the operator too. When the cranks did work, we could get the window to open. However, to close the window you'd have to lean on it from the out ... (cont.)

It is stamped Truth Entry Guard, and has gears similar to 39-036, but the operator's arms and link arms look different.

Hi there, What model do I need to replace this casement operator?

Hello- I'm looking to replace these two operators. The left side has markings 20544 and 30744. The long arm is 9.5" and the short arm is 4.375. The right side has markings 20810 and 40841L. Same arms lengths as above. Thank you!