Viewing all customer Discussions for:

15-104 Caradco Friction Shoe

Can't find any markings on the window glass or frame. The jambliners are crumbling so when I try new mounts to attach the springs to the sash, the jambliners break apart when handling. The jambliners have a rounded service, not v shaped and not square.

Hi I need help getting repla event springs for these windows and the springs bottom window holder. Lease let me know if you can help I jave more epics and info as well

Needing replacement springs for five Sun Windows; four of them are 34 x 60, and one is 34 x 72. Please refer to attached photos.

I HAVE SEVERAL WINDOWS IN MY HOUSE WITH THESE TYPES OR BALANCE. I NEED THE PARTS AND A PROCEDURE TO REPLACE THEM. THNAKS

Channel Balance

These are hooked to a spring that looks like a door spring.I have no idea what kind of window these are i think crestmmor, but i can't find anything that just has a spring for the block and tackle part.

Do you have these parts? could not find any id on Windows

I need to replace 3-sets of a bank of three windows. Not sure what brand windows I have. (Maybe Hurd or Built Best). Here is what I know. Double hung Woden sash (24" x 28" visible glass upper & lower) Window jamb liner for 5-2 windows (62" long) Spring loaded liners Possible P/Ns (86E-62W, 58 ... (cont.)

I have a balance shoe as shown in the picture. Do you carry this type of balance shoe? Also, do you know how I remove the insert to replace the balance shoe? Thanks for your help

I have 24 31x74 wood double hung windows installed in 1999. Every one of the friction shoes on the bottom sashes has broken. I believe the 15-104 shoes will fit but have a question about anchoring the top of the springs. The upper sash spring is on an s-clip but the lower sash spring appears to hav ... (cont.)

Part is marked Us pat# 3466806

This house is 20 years old with 20 wooden double hung windows with coil spring balances. These plastic shoes have broken at the spring connection. There is no name or number on any of the windows or parts.I am looking to replace all of shoes on these windows. What do I need to get?ThanksJohn ... (cont.)

Hi, I ordered a replacement clutch shoe and it doesn't fit. The groves are off. Can you help me get the correct part?Thank you,Matt

have Caradco wood double hung tilt out windows. Im looking for the Balance springs and clips for the jamb liners. Also need fricton brakes. Date code on glass shows 2/85

It is the slide that has an attachment at the top for the spring to attach. The top has broken. I need to replace the part that the window pin at the bottom fits in and then the spring hooks on to

Hi , I have a couple of windows that need balance spring assembly I have included a couple of shots showing the part and the only label indicating the window model. Any help would be greatly appreciated Regards Joe Butera

these windows are made by Vetter and have a part which is broken on both sides. not sure what the name of part is, but a small metal rod at base of window slides into the hole at bottom of the piece. the top hook is broken off (and still visible in window slot, although it is sideways) , but shoul ... (cont.)

There isn't any markings whatsoever. Our home was built in 1987 and the whole house was fitted with these double hung windows. The spring unextended is 17''. The plastic piece has a hook for the spring and a hole for the window stem. The plastic has gotten brittle through years of heat and cold. Tha ... (cont.)

On several windows the springs aren't attached. It appears that the part that connects the spring to the piece the windows locks into has broken. I've included an image of what a complete one looks like.

need these