Viewing all customer Discussions for:

15-104 Caradco Friction Shoe

Please let me know the manufacturer / part number of the window balance, its a 24" spring. The window might be 35 years old original to the house. Thanks,

How do I go about removing the window from the rail. Looking to swap them with an uncracked window from another room in house.

No idea on part number, manufacturer of the balance or window. It's been painted over a billion times.

Looking to replace the balances for these windows. I also need to replace a couple of the pivot bars/pins but I've never seen ones like these. Is this system obsolete? I didn't see any manufacturer stickers or labels so I'm not even sure who makes them. Any feedback would be appreciated. Thank you. ... (cont.)

These Andersen or Pella windows are about 20 years, and it has the flexible, vinyl jamb inserts. Can you determine which these are and how to remove and replace?

We have wooden windows. It suffices to say they leak. Bad. They are dated and don't align well. I've looked for ways to replace the track but can't find the matches. Our home is breezy to put it mildly. Are there any good replacements that don't require replacing the windows?

Looking for the pictured balance

I have MW 100 series Need new sash springs Can you help?? The springs are all part of the side piece. So, looks like we will need the complete side spring unit? For 3 windows. From top to bottom is 74 in Thats the length of the spring sash compartment

Came out of Anderson windows with the vinyl sliding track system. Springs with yellow painted tops seem to be clipped into the plastic shoe and then the bottom of the windows have a metal peg that slides into the bottom of the shoe. Need replacement shoes for several windows. Also some springs if ... (cont.)

I have MW vinyl double hung tilt in windows that that have broken or missing springs and clips. Windows are installed in a compression jam which can be removed to install new hardware. Do you have replacement parts?

Looking for these two parts for a double sash window. The house was built around 1980. No markings on the window as to who manufactured them. Thanks, Gary

These picture are from my 1988 EXCEL windows out of Waco, Tx need the spring and white plastic insert.Ben

wood windows 68x36 with vinyl tracks that use long springs, needed sash slides are 1/2 wide by 2 3/8 long

I'm working on some windows that have some sort of long spring that attaches to the window sash and to a narrow pivot shoe. The top of the breaks over time (it's plastic) it's a pretty common problem with these windows but I cannot identify the parts if they are available or if they can even be repl ... (cont.)

Not exactly sure what this is called.

I am looking for the parts of a spring balancing mechanism for my window and instructions on how to assemble them together. Spring does not look damaged. So, I am looking for the sliding "shoe" and bracket with the pin, which is scrood to the window, and how to assemble the spring with the "shoe", a ... (cont.)

I also do not know the window manufacturer. My wood windows are double hung and do not tilt out. While trying to remove window for cleaning I broke the 'shoe'. I have found 15-104 that looks almost exactly as mine(pic below) except for the 1/4 in protruding plastic that is on mine and not on 15-104 ... (cont.)

I have finally got all the weights and sizes for the double hung windows that I need parts for. Here goes.*Total size is 40 widthx54 length inches weight is 12.8# The sheath with spring inside with attachments is 29 inches. Need 8 sheaths and springs. Pictures of the attaching parts are in ... (cont.)

Plastic part attaches to spring and tilt window is attached inside a plastic side

Wondering if you have these parts? Need 4 shoes which are for tilt out Crestline windows. Only need 1 coil. Let me know if more info is required. Coil is 28 1/4" not including open ends.