Viewing all customer Discussions for:

15-118 Pivot Shoe, 9/16" Thick

I am looking to replace both the spiral balance and shoe for a double hung, tilt window. The spiral balance tube is white and measures 16", 3/8" diameter. There is no tip color visible. The shoe measures roughly 1/2"(9/16?) x 1 1/4" x 2". It has a green "button" with a white cam. ... (cont.)

Hello, I am looking for pivot locking shoes for my double sash tilt windows. I purchased some a while back but can not locate them on your site. Dimensions: 39/64(.609) THICK 1-1/4(1.250) WIDE 2-1-16(2.0625) LONG I have attached some pictures of the item.

they measure 9/16 thick x 2-3/16 long x 1-1/4 inch wide .do you sell or have another supplier that can locate these parts for me? i need 24 of them .Thank you for any assistance you can give . Mel Snyder

Plastic (or nylon?) insert is broken on one side of window frame. These are photos of the unbroken part. It is a rotating fitting. The metal "ears" at the bottoms of the top window sash are inserted into the rotating fitting. Believe the windows were made by ?Thermal Industries, out of Pitts ... (cont.)

2" x 1 1/4 x 9/16

My windows are single hung . Pivot bar is broken, Dont know the make of the window. Have to select the proper part. I have attached the diagrams with exact sizes and pictures of bar & shoe. Please help to select the proper part.

Need pivot lock shoes for SILVER LINE windows series 1000 DH to replace broken ones. Assigned manufacturers code and product line # 352-001. Windows are double hung and have spiral balancers. I think these are the measurements 2 1/8 x 9/16 by 1 1/4 . Would it be part number 15-118? ... (cont.)

Need replacement Pivot Shoes and Valance Clips.

piece from each side of the window frame that receives the window fastener. I have photographed two different pieces here but they appear to be completely interchangeable. I need 40 of them.

Hello, I'm looking for replacement of the pivot lock shoe. attached photos of existing shoe. The measurement is 9/16" D; 2 1/16" H and 1" W. Thank you, Paul

I need to purchase two pivot shoes, it measures 2" x 1 1/4" x 9/16" Which model you will suggest? The pivot bars I have are 26-068. Thank you for help!

The dimensions of this shoe are 2" x 1 1/4" x 1/2", as good as I can measure. It has a blue circle with an opening that is 11/16 x 12/16 with the peg being 1/16. The opening in the middle is 5/16 x 7/16. This is from a Traco double hung window that was purchased between 1995-1998. I would ... (cont.)

Hello. We just moved into an apartment on the 28th floor of a high rise that has original Traco tilt windows, they take quite a beating. I want to replace the balances and hardware to get ready for winter. I've measured the balances, they are 5/8", 29" red tip. Looks like the pivot shoes ar ... (cont.)

Do you carry this part??????????

To whom it may concern, The pivot shoes in our 1998 house with Twin Seal MW windows are deteriorating and need to be replaced in all the windows. I would need 56 Pivot Shoes to replace all of the existing ones. Our window balances are 3/8

Dear helpful Swisco people, We need to replace block and tackle channel balances (more on that later) and some pivot shoes. I would like a shoe that allows the window not just to tilt, as we have now, but also to allow us to lift the window out. As they are, we have to unscrew the pivot bar, sli ... (cont.)

part is 1 1/4" wide by 5/8" deep blue center

Can you help me identify this pivot shoe?

See attached photos. ID of channel measures 1 1/4 in. so 1-1/4" T-Lock Balance Shoe Product Code: 15-195 should fit? Thanks Dirk D.

Need 'pivot locking shoes' for several windows, (10 'shoes'). Sold under name Acan. Cannot find an exact duplicate in the photos you have posted. (See photo). Thickness 9/16". Will also need new spring and installation tool. Let me know if you need more info. Tad