Viewing all customer Discussions for:

15-118 Pivot Shoe, 9/16" Thick

Hello, I am having some issues with the windows in a new apartment building I have. I would like to test out replacing the balances on one window and if all goes well, purchase new ones for all windows. I have attached all the pictures your site allows. 2 - New Spiral Balances 31" Tube ... (cont.)

The piece I need is 2 1/8

I am looking for replacements for a MW window. Pivot lock shoe with markings 590csb on it. It is appoximately 2 1/4 long, 1 3/8 wide, 5/8 thick, all give or take 1/16. I plan to use your 26-366 pivot bar with them. Thank you.

Worker on a job replacing 35" balancers for a client. They're TRACO windows with a double balancer set up, (1) larger dia, and (1) smaller dia balancer. Have matched the shoes to the 15-118, and customer has previously purchased the larger balancers, but was unaware of the smaller dia balancer tucke ... (cont.)

Looking for correct window pivot balance shoe

I have to replace several pivot shoes. The dimensions and picture of your part number 15-118 look exactly like my part; however, I would like to get a pivot shoe that has an opening (an opening or slot in the cam) so that the sash could be removed more easily. The windows are very heavy and its no ... (cont.)

Hello- In the past, I have purchased your Part # 15-067 which is no longer made. Your 15-118 has been recommended as a replacement but frankly I do not like what I see as to the way it is designed. It also appears to me that a 15-129 or 15-153 or 15-178 would work. My windows are "quite old" (20+ ye ... (cont.)

part for window sash to open and close could use a couple of these

Our parts list calls for a 15-067 9/16 thick pivot shoe. I did not see this in your list. What replaced this number. Allen

I need help with ID on a part. I have double hung windows with a spiral balance and a 17/32 tilt shoe. I can not for the life of me think of the name for the metal bar on the bottom of the window frame that sits the window into the shoe.

Hello- I need to replace this part in several windows. I am not sure which is the most suitable part to use- there aren't any on your website that are exact replicas. My best guess as to measurements for this part are: 2 inches tall, 1-1/2 to 1 5/8 wide, and 9/16 inch deep. Which part do you recomme ... (cont.)

I need to replace several broken pivot shoes from single hung Patriot windows. The windows are original in a house built during 1998. No markings or numbers are obvious and since there is no cut out, I can't remove the shoes until I order the jamb spreaders. The pivot shoe is 9/16" thick and 1-1/ ... (cont.)

I think this may be the one I need: Product Code: 15-121 -- however, my existing broken one has a white cam. I'm attaching photos. It appears to be 9/16" thick, 2" long, and 1 1/4" wide. These windows were installed in 1998 I believe....no idea what brand.....pulte homes.

Spiral 29" long ,Yellow tip ,3/8"Tube Dia. Pivot lock shoe 1/2" thick ,1-1/4 wide ,2-1/8" tall Tommy

Goes with balance 3x8 x 29 yellow. Shoe has white cam. I can't remove shoe at cut out as shown. Why?

picture of intact, working pivot shoe from another identical double hung window. Broken shoes are in pieces.

I need this to replace a broken one that the upper sash spiral balance connects to. See photo. The photo is of another window that operates correctly.

Height top to bottom frame 31 5/8 inches. I just ordered latches from you today, then noticed the rods to the "broken" window are also missing. Thanks

I need to replace several shoes and want to go ahead and get the corresponding spiral balances while I'm at it. The shoe has the exact dimensions of your 15-118. The balance is 29" with diameter of 3/8". The tip looks grey but I think it's just white that has faded. Do I have the right shoe picked ... (cont.)

My pivot lock shoe measures 1 1/4 W x 2 H x 9/16 thick. Do you any this size? Thanks, Ted