Viewing all customer Discussions for:

58-099 Gray Pile Weatherstrip, 9/32" x 5/16"

I have been scouring the internet looking for this door weather stripping. I have it on several of my commercial aluminum frame glass swing doors. All were put in in the early eighties. The pile backing is 5/32" or .150 and the pile height needs to be 5/16". Can you get this size or point me in ... (cont.)

This is felt weatherstripping 3/8 inches wide at the bottom burlap-like material that slides into the metal track along the door frame. The felt is very matted down after dozens of years use but seems to be about 1/4 inch high and about 5/8 inch wide. Hopefully the photos will be clear to you. Th ... (cont.)

I'm replacing weatherstripping on my 35+ year-old aluminum windows. The track in which the window rides appears to be 1 1/32" wide (maybe 1 1/16" in some places) and the windows themselves are 7/8" wide. The windows take pile weatherstripping in 9/32" channels on both the inside and outside. 1. W ... (cont.)

Hi, I have a Series 1200 Aluminum Patio Door. Water seems to be leaking into the track from between the sliding screen door and the sliding glass door. I have a feeling its the weather stripping that makes the seal and mine is pretty worn away. If not any other suggestions? What is the prop ... (cont.)

Do you carry weatherstrip like this? Our house is a modular, built in 2009, the door is aluminum. The opening of the metal strip is about 1/4". I don't need the metal part, just the rubber weatherstrip. Thank you very much.

I believe it to be 1/4 x 1/4 stripping for the door..... I only saw a stick on option so I figured maybe y'all could point me in the right direction....

I have an old aluminum window panel that holds 2 movable glass plates and screen. The aluminum window frame is mounted on the outside of a wood window. I am painting the window frame and need to replace the pile strip that is broken and worn out. I cannot find a replacement at the stores. The pil ... (cont.)

Which of your gray pile weather stripping do I need to satisfy my requirement of decimal dimensions .270 back x .260 pile height? Your fractional dimensions 1/4" could go either way at .230 or .260

I am looking to two types of weatherstripping for my sliding glass door: A wool pile and a bulb seal. I would like to send you samples, and also photos.

Hello, I will attach two photos to show you what I'm trying to find. We recently moved into a condo. The sliding windows date to the 1970s - metal frame, rollers on the bottom and top. Eventually we'll replace them. I need rollers for the bottoms and tops. I had purchased the 87-191 gear on your we ... (cont.)

Hello, I received our order for item 58-099 but the pile of 5/16" is far too short to fill the gap in the door I'm replacing the old pile for. The 9/32" width of the base is perfect but I need a taller pile length. I have a small piece of pile from another door in our building where the hei ... (cont.)

Hello, yesterday I ordered some lengths of 58-045 to replace the worn out 40 yr. old wool pile insulation in several 43 year old sliding glass doors. Having pulled out a strip, I measured and decided that the 9/32 x 1/4 was the best fit, even though the new strips have a plastic fin in the center ... (cont.)

Do you have the 9/32" wool pile in black? Can you get it? I need the height to be approx. .317" high (8 mm).

I have custom (painted) steel doors and frames on my modern house. I have wool weather stripping that I think is your 58-099 or 58-105. It was apparently glued on, and does not sit in a track. Should I remove the old stuff with a putty knife? What sort of adhesive do you recommend to attach new ... (cont.)

Do you have cross references for Tubelite doors? I am looking for replacement pile for both the door stop inserts and for between the doors (inserts in a middle groove in the end of the lock stile). Tubelite parts P01098A, P013A, and P013D. I am thinking possibly Swisco 58-099, 58-050, and 58 ... (cont.)

I measure 1/4 x1/4 non sticking. Do you have that size in non sticking. If you do not what do you recommend

Hi, I figured out that I need 9/32 x 5/16 wool pile for my four sliding glass doors. My question is what will retain, or keep the pile from sliding back out? The problem is the old seals are sliding back out, and then get smashed in the door jam when closing the door. Would you suggest some rubbe ... (cont.)

I have 35-yr-old single pane windows with metal (aluminum?) frames. I'd like to replace the pile which is missing entirely, disintegrating, filthy or just not sealing well. The existing pile measures with a 1/4" wide tab and 1/8" deep pile. (see the first three photos). Some of the windows ar ... (cont.)

I am looking for the item shown in the attached picture. It is the grey felt lining that goes in the upper rails of my closet doors and the door rides in-between. The felt is missing in one of the rails. The closet opening is 6'1" wide.

Which one do I need to order