Viewing all customer Discussions for:

62-005 Rivet, 3/32" x 5/8"

Hello, I was trying to confirm the Rivot size needed for part 15-272. Thank you!

I have a few sizes of balances that need replacing. I measured two sizes and want to make sure I get the correct ones. Attached are pictures of one: length 29", 1/2" frame and 2830 on the frame as shown. I believe they would be your (S395-29 / 2830). I also have a 23" with 2220 on the frame. Can you ... (cont.)

Window balances are non-ribbed u-channel 36 inches long with the number 35e stamped in them. I need to remove the entire side plastic insert after removing both windows to install or remove balances.

Whats the name of the pin

I'm the president of an HOA for a condo building in Raleigh, and I have a crap ton of these window balances that are bad. They are similar but the top and bottom are slightly different sizes - pictures attached. Shorter balance is numbered E30E and longer one is numbered E34D. If you can help me ... (cont.)

I need4 black ones and 4 white ones Thank you.

Hi Swisco: See the attached for the ends of the balancer. It is for the same type of hung windows. There are 3 in a row. Let me know what else you need. Thanks,

I need these items ASAP9/16 In W X 5/8 In D Window Channel Balance

Please check for me if your 33" series, 385 channel balance, option 3250 can repalce the one showing in the pictures I attached. Thanks!

I would like help with figuring which channel balance to buy I took out old one the string broke off from clip. It's a tilt vinyl window, I don't see anything that tells me the brand but I've been told it's a Harvey. the old one is 20".

Hallo I already order couple times from you It's great parts I already have selected balancers and want to add couple things Top sash locks (seding picture) And from last order I measured wrong and missy to trim channels canI buy some channel rivets? Thank you Bruno

We need to add another rivet to this balancer for it to work for us. Is this something we can buy separately? Also, we need to purchase shoes for our balancers. We use the S795-27". Pictures are attached. Thank you

Looking to see if we can find this balance. 32-3 JI5 CMC 5 is on the balance End of balance to end of balance = 33" End of balance to where the spring is connected = 32" I'm not sure which measurement you need. Balances go on the side of the window

The balance is a 28B BSI

I have 2 balances I need to repair/replace one is stamped 19 5 and has a BSI stamp on it. the metal channel is 19 5/8" long. the bottom fitting is damaged so I think I need a entire new balance. the bottom fitting has a patent # 6598264. The other one is stamped 25 2 and has a BSI stamp. it just ha ... (cont.)

I need some channel balances for this unit. The windows are from Florida Extruders International They are the Milestone Single Hung Series 1000. The channel is 29" long and 1/2" wide. The spring is 14". The only marking is 28B. It seems similar to your S380 other than it does not have a ramp ... (cont.)

Do you have these clips?

I am in need of (2) ALCAN 2930 and (8) 3620 Channel Balances - from 1990 Alcan windows. I am also in need of the snap in glazing. The glazing measures 9/16 (instead of the 7/16 that the 55-092 shows) and is 7/32 the same as the 55-092. Additionally, the window locks are 2 3/4 inch (2 1/4 inch center ... (cont.)

Looking to replace these balance parts. I only require 4 pieces with rivets