Viewing all customer Discussions for:

62-005 Rivet, 3/32" x 5/8"

I am in need of 2 window channels and 10 extra rivets. The channel is marked 1720C BSI If more info is needed please call or email Jim

Hello, Thank you for your help. I have a sliding window that cannot be open or bestir say cannot keep open. I am attaching pictures of the broken part (first 2 pictures) that my handyman believes is the problem: top sash guide. measurement: 11/2 inch long and 1/2 inch wide. Attached are also pi ... (cont.)

I am would like to verify that this is a 15-005. As you can see the internals are a little different, but the overall dimensions are correct.

Help! I recently ordered and received a 31" Series 385 Channel Balance S385-31 option: 3030. I installed it without any problems. I was very excited about repairing the remaining windows in my family and dining rooms. I ordered six more pairs and began installing them. Unfortunately I have had ... (cont.)

Could you please help me identify the correct parts based on the stamp on the balance. The stamp is 29 4 BS.L MH I'm not sure why this has 29 on it because when I measured it the measurements were 30' x 1/2 x 5/8 so I'm torn between 29 inch or 30 inch. I need the numbers for all the parts in m ... (cont.)

Hi, I'm having trouble finding the replacement parts for my sash window balance. The balance is 1/2'' wide. I would also need to purchase the shoes, top, and sash guide. Hopefully the shoes and top are standard replacement, the sash guide is very difficult to identify, so I've included some photo ... (cont.)

I am looking for replacements. The aluminum part is 23 inch long. Looks like 23" Series 370 Channel Balance Product Code: S370-23 Do you have replacement springs. Thanks, Ray

Hi, The pix show a BSI 26" channel balance. I need one more just like that one. I also need parts to complete an assembly of another smaller (17") channel balance just like that one. We have the 17" metal spring but there isn't a shoe or top on it. And then I'll get some spare parts as well. ... (cont.)

I need to order a replacement block and tackle balance device for a tilt-in window made by Republic. From your website and the dimensions of the old device I believe I need 26" Series 770 Balance Product Code: S770-26 With a Rivet, 3/32" x 39/64" Product Code: 62-005 And a Rivet Inst ... (cont.)

My windows use series 700 channel balance. i'm missing both channels for a 20" tall window. my 16" windows uses 15" and my 24" window uses 23" . will a 19" channel be the right size for the 20" window? also my old top and bottom shoe had a "tit" that snapped into hole my new 19-001 and 15-008 need ... (cont.)

My home has many windows. I have had to replace two sets of channel balances so far, and now I have to replace another set. Previously, I used series 385 tops and shoes because those looked most like the originals. However, the tabs are thinner on the replacements than on the original balances; ... (cont.)

The company that made our windows is out of business and I don't know what their name was. I have three broken channel balances. We ordered a 795 from you and it's perfect, almost. The shoe (I think that's what you call it.) is different and won't fit in our sash. I have pictures of the one that ... (cont.)

can you help me identify these balance parts so that i can order them. and the plastic pieces for the window it self. all parts are pictured. thank you bill

I have window balance broken on the right side. I am looking to replace it. I have looked in your online catalog and cannot find an end piece that looks like what I am looking for. The balance has "DB F02 22B" stamped on it and is 22" long. Attached are some photos of the left piece that is working ... (cont.)

I have a home built by Adams Home Builders in 2002. I am having some problems with several of my Kinco aluminum framed windows. The nylon piece that is located on each side of the sliding window fails and allows the channel balance top to slide past. It always happens when I close the window. I beli ... (cont.)

Can I use your 3/32 x 39/64 rivet(normaly used to attach the ends guides) to snag the spring balancer?.

How do I install 19-008 & 15-025 top/bottom shoes into my channel balance. Specifically, what kind of rivet (part number?) do I need? Also is your rivet tool (show on your diy page for small rivets)work for this application? Thanks! Dave