Viewing all customer Discussions for:

15-150D 1/2" Coil Double Support

Hi - The part shown in the picture broke and my window will not open. The same part on the other side of the window looks bad as well. Any suggestions on fixing this? Thanks!

I have Norandex Dimension 1 Series windows from 2000. I need to replace the some balancers. Actually the springs & shoes are in good shape for most of them, my problem is that the plastic cover has become very brittle and is breaking off anytime you raise/lower the window. The tilt lock is de ... (cont.)

there are 2 or 3 coils each side 2 screws 1 plastic cover/coil holder 1 pivot shoe shoe are rusted and i tried to put coils back into position and they would drop below the coil holder cover when trying the window as seen in the photo

The only marking I can find is the number 9 stamped on the two coil springs. Thankyou

I have previously ordered window parts from Swisco over the past years.My window sash weighs 18.37 lbs approx. & has a S160-9 coil balance spring with the 15-111 pivot shoe & 15-150S single support installed with it. Because the springs have broke previously can I install a 10 LB. coil spring instea ... (cont.)

I have Simonton single hung, double pane windows that are 20 years old. Two have broken coils, 1 is approximately 34x70 and the other approximately 34X58. I have attached pictures of the window labels for each, the broken coils on each and the good coil on the larger one. There are no markings on ... (cont.)

The window I am working 0on has 2 springs that both attach to what appears to be your 15-150D standard support. One mounted directly above the other. One spring is 3.5 pound and the other is 5.5 pound. The video on your site only shows installation of a single spring unit. Should I change over the w ... (cont.)

Sir, attached are two pictures of the balancer in what I suspect is an Atrium Double hung tilt window. These windows are installed in a USDA Rural Property operated by the Housing Authority of the City of Pekin. Thank you for your assistance. Michael

I need two of these All I have are broken pieces On the side is a partial part#801020 and the coil end has a rectangle hole and looks like the end on the 165 egress coil on your website - it has the #6.5 and 35" marked on the coil and then a number that ends in 3208 that has a little flag above i ... (cont.)

Part # 801020

Broken coil spring. Part no. 801020. RH facing window

Which cioils and holders would you recommend for these pics?

Plastic cover over coiled metal is breaking on several Windows that are 15 years old.

Please identify this part.

I need to replace the balance in my Simonton Luminess windows. I've included a picture of a working one and one that is missing the cover. I hope that is good enough. I'm afraid to take apart a working window because the last one I did shattered the balance pieces and I couldn't get the window close ... (cont.)

I am in need of parts for my windows they are simonton windows I need balance coils,coil covers, privot blocks

Hi, I don't know any other information, it looks like double spring coil. Could you tell me which type coil I should buy? Thanks, May

Plastic housng for the coil dried up and cracked into pieces.

this is a dual coil support cover for simonton window. Over all length of cover is 4.0 inches and width is 1.25 inches. Could you please help me to to pick right fit for this. Thanks.

There are broken parts in two places on my window. The window won't stay up now when we open it. Please see the uploaded photo.