Viewing all customer Discussions for:

15-150D 1/2" Coil Double Support

This is a picture of the coil balance cover that I need. I looked at the covers that you have but I don't see any that have 2 holes for the screws and I need 2 holes. It's for a half inch dual coil. The dimensions of this plastic cover are 4 inches top to bottom and about 1 & 1/8 wide. Thanks for a ... (cont.)

We bought these in 2009. On 3 windows the plastic parts on the side tracks are broken. The part number is 801020. On one window, the horizontal channel on the top of the lower window is broken, but we may be able to repair it.

I have Double Hung windows that are from the year 2000 They were manufactured by Corning. Need Balances, Pivot Lock Shoes and T slot offset hollow seals. I have both Single & Double Spring Balances but I have no Weight Identification.

Lumines 400

I ordered 15-150D they are wrong. Monton window 0003301057. Manufactured 3/30/00

Depth is 0.5 in, width 1.25 in, high 3.5 in

Have 20 year old single hung windows. One window is hard to open and close with a broken part under the coil covers on one side. Want to get all new parts for that one side but not sure what part numbers are. hope the attach pictures will help.

Need information on balance assemblies for Simington Single Hung windows. I have included a couple of photos of the assemblies. The springs are 1/2" wide and there are 2 springs per balance assembly. The lower parts of the assemblies are OK but the springs and upper portion of the assemblies are b ... (cont.)

Need help from bring his part

My windows are Simonton windows. They're single hung. They're white. Some of the parts are broken on the windows. I called the company and they said they no longer make these windows and referred me to you as a place that might have the parts. First two pics...0779 & 0780...are the same piece. Th ... (cont.)

I need coil spring balancer parts for my norandex windows, as it looks like there are 2 coil springs on each side of the window. I will also need to find some of the locking guides that the window pivots on along with the metal pivot arms that are fastened on the bottom of each window that fits int ... (cont.)

Hi I am attempting to repair some windows from 1994 that are still in good condition. However, the coil spring balance systems are broken and need to be replaced. I have attached photos for your review of some of the parts. Could you please help me identify them and let me know if you have those re ... (cont.)

Good Morning We are searching for a brake shoe with the corresponding balancer for it. the weight of the sash is 30 pounds I have attached a photo of the brake shoe do you have in stock?

Weight of bottom sash is approx. 25 lbs and the coil looks to have a marking of 35 on it.

To replace the balances for my Simonton windows, I have determined that I need Pivot shoes #15-111, Supports #15-150D and 1/2" springs. The sash weighs 18 lbs. 4 springs are used per window. What spring number(lbs)should I use? The broken springs don't have any numbers on them. Will all of your 1/2 ... (cont.)

Single hung Mi Window balance 42" wide x 66" high series 350 / 35T sh I need one for left side, if you are inside looking out.

Hi - We previously contacted Norandex for service on our Simonton window warranty repairs. It seems the balancers are broken in a few windows I have. Some pictures are attached. How do I identify the correct parts needed to repair? I have some neighbors looking to make the same repairs. ... (cont.)

I have been told by a window company that my windows are manufactured by Heartland but the only words on them are Alliance. I mostly need new balance covers although I have one window that all of the coils had to be pulled out because they got so messed up. I also need a few tilt window latches. ... (cont.)

Hi there -- I had ordered 6 coil supports for Simonton single hung window 15-204 s. The attached photo shows the piece I received as compared to what is currently on the window. As you can see, what is currently on the window has two screw holes, and is slightly longer than what I received. Can y ... (cont.)

Hi: I already ordered parts S 140-20 x2 and 26-398 x2. Not exactly like my old ones. Here are pictures of my old ones. Can you advise what I need?