Viewing all customer Discussions for:

15-150D 1/2" Coil Double Support

This is on an ocean facing window. These are the left and right top sash pivot pins broken off in shoe and attach to window via 3 screws in an "L" type piece, which appears broken. The pin slide into the window frame, attached by 2 screws into the frame and 1 screw on the side where the actual pin ... (cont.)

I need the coves for the balance springs.

Hi, I would like to buy replacement coil balance hardware for a Milgard double hung window. The coils for the upper sash broke as shown in the attached photos. I figure I might as well replace the coils for the lower sash while I'm at it because they probably aren't far behind. The coils for the upp ... (cont.)

Part size 2 15/16 inch by 1 3/16 inch, not including shoe part in photo. I need two constant force window balances including shoe and coil springs. Window manufacturer is Hayfield Windows, Double Hung Window #800 Part # on photo is 801020 Window weight is 24 lbs., so need to support 12 l ... (cont.)

Can you tell me if you have the parts shown in the attached photos

What should we reorder? Metal coil is 1/2" wide and has the numbers 246D Z with a 1 under the D and #6.5 354.The gray shoe is 1/2" deep, 1" in length and 1 1/4" wide and has Patent 4,610,108. The white coil housing is 1/2" deep, 1 11/16 in length at it's middle, and 1 1/4" wide and has the numbers ... (cont.)

Window appears to have been forcibly removed shearing off the springs to the window balance. Balance body and shoe appear undamaged.The springs are marked as 6.5 x 35, and #7.5 x 35" respectively.I need the two sets of springs to repair this window balance.Please advise.James

need balances full assembled for double hung with the double coil. can you please let me know if there is a full assembled part number. part number on the balance says Part #801020

I would like to order several of these parts. Can you tell me the part numbers?Norm Thank you!

2002 double coil balancer

Milgard Style Line Single Hung window (36 wide x 60 tall) tilt-in lower sash. Balancer mechanism is twisted in frame and can't remove lower sash. Suspect balancer is damaged/twisted. Not sure what part(s) to replace and how to get window sash out

Part #801020 on white plastic #5.5 on coil 5232208 Can't see numbers on second coil Shoe 4,610,108 possible patent number

The coils have w6.5 35" and the other has a number 4 on it, it is a half inch wide. I will new coils,coil supports,pivot shoe and pivot bars if required.

Hi there. Emailing from UK. Can you help. I have UPVC sash windows. They've been in for around 15yrs. It appears the coil balance has snapped and distorted the other 2 coils (top sash had 3 coils on it). Also noticed the balance shoe on the other side is about to fail with screw just handing onto th ... (cont.)

Hi, I have a double hung window that will not stay open. I know I need new tilt latches and the whole new balance assembly including spring, shoe, and cover. I was hoping you could identify the parts that I need to buy. Also, if you could tell me where I could buy the parts, that would be amazing. A ... (cont.)

We need to order the correct parts. We need the left and right sides of the coil balance for one window from 2001.

I need these parts (Window lifts and tilt latches )These windows might be Weathershield or Marvin but I don't see a name. The build is 2000 per the label on side of the sash

I was told to contact Swisco for help finding these coil balances for my SImonton Window. Can you help?Thank you,Tom

My window is 33x36. Thank you for your help

I need to replace several broken springs in my windows. Info: Plastic piece 3 inches, screws 1 1/2 inches apart springs 1/2 inch two springs: one has a lable #5, other I could not find the size. windows double pane 31" wide and 32" height windows approx 22 pounds .